BARTEC B (-ASSEMBLY): Ex d ... IIB + H2 T6 ... T3 Gb
BARTEC C (-ASSEMBLY): Ex d ... IIC T6 ... T3 Gb
BARTEC D (-ASSEMBLY): Ex t ... IIIA / IIIB / III C T80 °C ... T130 °C Db
BARTEC E (-ASSEMBLY): Ex e ... IIB / IIC T6 ... T3 Gb
Additional markings are provided depending on the certified components used in the actual construction.
This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.
This Unit verification certificate is issued as verification that the Apparatus identified on page 1, was assessed and tested and found to comply with the IEC Standard list below. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.
The apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:
As this is a Unit Verification Certificate, no QAR is applicable as this certificate is specific to the items listed by serial number or other unique identification.
The control / distribution panels consist of one (Series BARTEC B/C/D/E) ore more (Series BARTEC B/C/D/E-ASSEMBLY) enclosures made of aluminium, stainless steel, sheet steel, carbon steel or black reinforced polyester, as applicable and depending on the type of protection. The enclosures accomodate measuring, control and switchgear as well as terminals for intrinsically and non-intrinsically safe circuits and may be fitted with actuator elements, indicator lights and inspection windows. Field wiring connections are made either direct by means of suitable certified cable entries and/or plugs and sockets or indirect using connection boxes mounted to the main enclosure.
Rated supply voltage and current: maximum 1000 Vac / 1500 Vdc; maximum 1000 A
Working voltage: maximum 25 kV (Ex d and Ex t) or 11 kV (Ex e)
Conductor cross area: maximum 400 mm2
Ambient temperature range: -55 °C to +80 °C maximum
Degree of ingress protection: IP54 up to IP66/67
The actual technical data, types of protection, ambient temperature range, IP rating and EPL depend on the applied equipment and components and are indicated on the marking label.