IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

leftca_pagelinks
IECEx Certificate
of Conformity

 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com

 
Certificate No.:
IECEx INE 15.0016X issue No.: 0

Certificate history:

 
Status:
Current
 
Date of Issue:2017-06-07Page 1 of 3
 
 
Applicant:
OFFICINE MECCANICHE MAM
Via Vico Veneto, 32
I - 20090 Fizzonasco di Pieve Emanuele
Italy
Equipment:Blanking Elements, Adapters, Reducers and Niple type T..., R..., M..., and N...
 
Optional accessory:
 
Type of Protection:db, eb, tb

 Marking:

Ex db IIC Gb, Ex db I Mb
Ex eb IIC Gb, Ex eb I Mb
Ex tb IIIC Db
IP66

 
 
Approved for issue on behalf of the IECEx
Certification Body:
Thierry HOUEIX

 
Position:Ex Certification Officer


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 

  Certificate issued by:
INERIS
Institut National de l'Environnement Industriel
et des Risques, BP n2
Parc Technologique ALATA
France


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx INE 15.0016X
 
Date of Issue:2017-06-07Issue No.: 0
 
Page 2 of 3
  
Manufacturer:
OFFICINE MECCANICHE MAM
Via Vico Veneto, 32
I - 20090 Fizzonasco di Pieve Emanuele
Italy


 
Additional Manufacturing location(s):

 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2011
Edition: 6.0
Explosive atmospheres - Part 0: General requirements
IEC 60079-1 : 2014-06
Edition: 7.0
Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
IEC 60079-31 : 2013
Edition: 2
Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t"
IEC 60079-7 : 2015
Edition: 5.0
Explosive atmospheres – Part 7: Equipment protection by increased safety ''e''
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:

FR/INE/ExTR17.0014/00


Quality Assessment Report:

FR/INE/QAR11.0004/05


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx INE 15.0016X
 
Date of Issue:2017-06-07Issue No.: 0
 
Page 3 of 3
 
Schedule
 EQUIPMENT:
Equipment and systems covered by this certificate are as follows
 
 

Metallic devices intended to be fitted on flameproof enclosures, increased safety enclosures and on enclosures for dust explosive atmospheres with type of protection "tb".
These devices get the degrees of protection IP66 in accordance with IEC 60529 standard.



 SPECIFIC CONDITIONS OF USE:   YES as shown below:
 
 

These metallic devices are intended to be used in the following operating temperature: 

  • -30°C to +130°C with NBR gasket.
  • -60°C to +210°C with SILICON gasket.
  • -60°C to +300°C without gasket

 

 




Copyright © IEC-IECEx 2019 , Geneva Switzerland. All rights reserved.