IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

IECEx Certificate
of Conformity

 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com

 
Certificate No.:
IECEx BAS 07.0075X issue No.:0
 
Status:
Current
 
Date of Issue:2008-02-08 Page 1 of 3


    
Applicant:
Thorn Security Ltd, T/A Tyco Safety Products
Security House
The Summit,
Hanworth Road
Sunbury-on-Thames
Middlesex
TW16 5DB
United Kingdom


 
Electrical Apparatus:601FEx and 801FEx Flame Detectors
Optional accessory:


 
Type of Protection:Intrinsic Safety


 
Marking: IECEx BAS 07.0075X
Ex ia IIC T4 (-20C ≤ Ta ≤ +70C)
Ex iaD 20 T135C (-20C ≤ Ta ≤ +70C)
 
Approved for issue on behalf of the IECEx
Certification Body:
R S Sinclair

 
Position:Managing Director


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 

 Certificate issued by:
Baseefa (2001) Ltd.
Rockhead Business Park
Staden Lane
Buxton
Derbyshire
SK17 9RZ
United Kingdom


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx BAS 07.0075X
 
Date of Issue:2008-02-08Issue No.: 0
 
Page 2 of 3
 
 Manufacturer:
Thorn Security Ltd, T/A Tyco Safety Products
Security House
The Summit,
Hanworth Road
Sunbury-on-Thames
Middlesex
TW16 5DB
United Kingdom


 
 Additional Manufacturing location(s):
Celestica Rajecko s.r.o.
Osvobozeni 363
Rajecko
CZ 67902
Czech Republic
 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2004
Edition: 4.0
Electrical apparatus for explosive gas atmospheres - Part 0: General requirements
IEC 60079-11 : 2006
Edition: 5
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
IEC 61241-0 : 2004
Edition: 1
Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements
IEC 61241-11 : 2005
Edition: 1
Electrical apparatus for use in the presence of combustible dusts - Part 11: Protection by intrinsic safety 'iD'
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:
GB/BAS/ExTR07.0135/00GB/BAS/ExTR07.0184/00


Quality Assessment Report:

GB/BAS/QAR06.0002/00GB/BAS/QAR08.0004/00


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx BAS 07.0075X
 
Date of Issue:2008-02-08Issue No.: 0
 
Page 3 of 3
 
 
Schedule
 
EQUIPMENT:
Equipment and systems covered by this certificate are as follows:
 
The 601FEx and 801FEx Flame Detectors are designed to detect the infra-red component of a flame and to trigger an alarm via a two wire control circuit. The detectors comprise a plastic plug-in enclosure with a small sapphire window, together with a printed circuit board (PCB) housed internally. The bottom half of the PCB which includes the majority of the electronic components on the PCB is encapsulated with only the detector, LED and safety components emerging on the top half. The whole apparatus is designed to plug-in to a MUBEx or 5BEx 5” mounting base containing terminals suitable for external connections. Any number of 601FEx or 801FEx Flame Detectors may be connected in series.

The 601FEx Flame Detector is intended for operation with conventional control equipment. The 801FEx Flame Detector is electrically identical to the 601FEx, but is designed to operate with the MX Digital Addressable range of controllers. The 601FEx and 801FEx Flame Detectors may also be labelled as 601FEx-M and 811FEx Flame Detector. All units are inter-changeable for intrinsic safety purposes.

L1, L2 and R w.r.t. L 
Ui=28VUo=Ui
Ii=93mAIo=Ii
Pi=0.65WPo=Pi
Ci=0   
Li=0   


The apparatus must be supplied from a linear source with an output resistor of 250Ω minimum.

 
CONDITIONS OF CERTIFICATION: YES as shown below:
 
1. The apparatus has a plastic enclosure which constitutes a potential electrostatic hazard. The enclosure must be cleaned only with a damp cloth.
 







Copyright © IEC-IECEx 2014 , Geneva Switzerland. All rights reserved.