IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

IECEx Certificate
of Conformity
 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com
 
Certificate No.:
IECEx BAS 10.0074X issue No.:3
 
Status:
Current
 
Date of Issue:2012-02-16 Page 1 of 4


    
Applicant:
Dialight Europe Ltd
Exning Road
Newmarket
Suffolk
CB8 0AX
United Kingdom


 
Electrical Apparatus:LED High Bay Area light
Optional accessory:


 
Type of Protection:Flameproof, Increased Safety and Dust


 
Marking: Ex d IIB T5 (-40°C to 60°C) Gb
Ex tb IIIC T100°C (-40°C to 60°C) Db IP66
Ta -40°C to + 60°C

or, when the terminal box is fitted

Ex d e IIB T5 (-40°C to 60°C) Gb
Ex tb IIIC T100°C (-40°C to 60°C) Db IP66
Ta -40°C to + 60°C

 

 
Approved for issue on behalf of the IECEx
Certification Body:		R S Sinclair

 
Position:General Manager


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 
 Certificate issued by:
Baseefa
Rockhead Business Park
Staden Lane
Buxton
Derbyshire
SK17 9RZ
United Kingdom


- PAGE BREAK -

IECEx Certificate
of Conformity
 
Certificate No.:IECEx BAS 10.0074X
 
Date of Issue:2012-02-16Issue No.: 3
 
Page 2 of 4
 
 Manufacturer:
Dialight Europe Ltd
Exning Road
Newmarket
Suffolk
CB8 0AX
United Kingdom


 
 Additional Manufacturing location(s):
 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2007-10
Edition: 5		Explosive atmospheres - Part 0:Equipment - General requirements
IEC 60079-1 : 2007-04
Edition: 6		Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
IEC 60079-31 : 2008
Edition: 1		Explosive atmospheres – Part 31: Equipment dust ignition protection by enclosure 't'
IEC 60079-7 : 2006-07
Edition: 4		Explosive atmospheres - Part 7: Equipment protection by increased safety "e"
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:
GB/BAS/ExTR10.0166/00GB/BAS/ExTR11.0105/00GB/BAS/ExTR11.0324/00


Quality Assessment Report:

GB/BAS/QAR10.0009/00


- PAGE BREAK -

IECEx Certificate
of Conformity
 
Certificate No.:IECEx BAS 10.0074X
 
Date of Issue:2012-02-16Issue No.: 3
 
Page 3 of 4
 
 
Schedule
 
EQUIPMENT:
Equipment and systems covered by this certificate are as follows:
 
The LED High Bay Area light (HBA) is a pendant floodlight rated at 100V to 277V, 50/60Hz, and up to 165W.

The HBA comprises an aluminium lamp enclosure housing high power LEDs and their associated driver circuits. A glass lens is clamped in place by an aluminium frame which is secured by 12 fasteners the heads of which are filled with epoxy resin to prevent removal.

The HBA has an integral cable and an external suspension bracket. 

 

 
CONDITIONS OF CERTIFICATION: YES as shown below:
 
1. The HBA is a factory sealed product, do not attempt to open; return to the manufacturer for service or repair.

2. The HBA is to be suspended such that no tension is applied to the supply cable.

3. The integral cable is to be terminated in a suitable terminal or junction facility. 

4. The external plastic guard on the HBA Series LED Luminaire with Sand Blast Shield (Variation 3.4) is to be cleaned with a damp cloth only.  

 

 


- PAGE BREAK -

IECEx Certificate
of Conformity
 
Certificate No.:IECEx BAS 10.0074X
 
Date of Issue:2012-02-16Issue No.: 3
 
Page 4 of 4
 
 
DETAILS OF CERTIFICATE CHANGES (for issues 1 and above):
 
Variation 3.1

Addition of an internal EMC shield together with clarification of the parts description, an alternative position for the external earth screw and an alternative self adhesive label.

Variation  3.2

Alternative version of the unit incorporating an increased safety terminal box.

The terminal box contains terminals as IECEx PTB 05.0003U and is electrically connected to the luminaire housing via an M25 line bushing as IECEx QPS 09.0001.

The terminal box is assembled using silicone rubber ‘O’ rings. Up to two M20 or M25 apertures are provided in the sides of the terminal box. Any unused aperture is fitted with blank plugs as IECEx BVS 07.0021.

The unit so formed is designated as the HBA Series LED Luminaire with Junction Box.

Variation  3.3

Alternative transportable version of the unit with a tubular stand to allow various mounting positions.

The unit is fitted with an increased safety terminal box as Variation 3.2 and with a Cooper Crouse Hinds cable gland as IECEx BKI 08.0007. An auxiliary external wire guard may also be fitted.

The unit so formed is designated as the HBA Series Transportable Luminaire.

Variation  3.4

Alternative version of the unit incorporating the increased safety terminal box as Variation 3.2 and fitted an external transparent plastic lens guard. A warning label is fitted to indicate the cleaning method for the guard.

The unit so formed is designated as the HBA Series LED Luminaire with Sand Blast Shield.
  
 ExTR:  GB/BAS/ExTR11.0324/00 File Reference:   11/0740
   
 
 








Copyright © IEC-IECEx 2013 , Geneva Switzerland. All rights reserved.