IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

leftca_pagelinks
IECEx Certificate
of Conformity

 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com

 
Certificate No.:
IECEx KEM 06.0056 issue No.: 1
 
Status:
Current
 
Date of Issue:2007-09-05Page 1 of 4
 
 
Applicant:
Hummel Elektrotechnik GmbH
Merklinstrasse 34
79183 Waldkirch
Germany
Equipment:Thread Adapter Series RSD-Ms-Ex-d and RSD-INOX-Ex-d
 
Optional accessory:
 
Type of Protection:d/e or tD

 Marking: Ex d/e IIC , tD A20
 
 
Approved for issue on behalf of the IECEx
Certification Body:
C.G. van Es

 
Position:Certification Manager


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 

  Certificate issued by:
KEMA Quality B.V.
Utrechtseweg 310
6812 AR Arnhem
The Netherlands


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx KEM 06.0056
 
Date of Issue:2007-09-05Issue No.: 1
 
Page 2 of 4
  
Manufacturer:
Hummel Elektrotechnik GmbH
Merklinstrasse 34
79183 Waldkirch
Germany


 
Additional Manufacturing location(s):
Hummel Elektrotechnik GmbH
Merklinstrasse 34
79183 Waldkirch
Germany

 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2004
Edition: 4.0
Electrical apparatus for explosive gas atmospheres - Part 0: General requirements
IEC 60079-1 : 2003
Edition: 5
Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
IEC 60079-7 : 2006-07
Edition: 4
Explosive atmospheres - Part 7: Equipment protection by increased safety "e"
IEC 61241-0 : 2004
Edition: 1
Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements
IEC 61241-1 : 2004
Edition: 1
Electrical apparatus for use in the presence of combustible dust - Part 1: Protection by enclosures "tD"
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:

NL/KEM/ExTR06.0059/00NL/KEM/ExTR07.0052/00


Quality Assessment Report:

DE/BVS/QAR07.0001/00


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx KEM 06.0056
 
Date of Issue:2007-09-05Issue No.: 1
 
Page 3 of 4
 
Schedule
 EQUIPMENT:
Equipment and systems covered by this certificate are as follows
 
 
Thread adapter, Series RSD-MS-Ex-d and RSD-INOX-Ex-d with thread sizes M12 to M63 and PG7 to PG48 in nickel plated brass or stainless steel for enclosures in type of protection flameproof enclosures "d", increased safety "e" or for use in the presence of combustible dust.
 
Operating temperature range:            
-20 °C … +95 °C (NBR o-ring)
-20 °C … +180 °C (FPM o-ring)
-60 °C … +180 °C (VMQ o-ring)

The thread adapters provide a degree of protection IP68 in accordance with IEC 60529.


 SPECIFIC CONDITIONS OF USE:   NO
 
 
 


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx KEM 06.0056
 
Date of Issue:2007-09-05Issue No.: 1
 
Page 4 of 4
 
 DETAILS OF CERTIFICATE CHANGES (for issues 1 and above):
 
 
Minor changes to the construction
 
 




Copyright © IEC-IECEx 2019 , Geneva Switzerland. All rights reserved.