IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

IECEx Certificate
of Conformity

 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com

 
Certificate No.:
IECEx BAS 10.0080 issue No.:2
 
Status:
Current
 
Date of Issue:2012-02-01 Page 1 of 4


    
Applicant:
HNL Engineering Limited
Dukesway
Teeside Industrial Estate
Thornaby
Cleveland
TS17 9LT
United Kingdom


 
Electrical Apparatus:ST1AD Liquid Level Transmitter
Optional accessory:


 
Type of Protection:Flameproof


 
Marking: Ex d IIC T5 (-20°C ≤ Ta ≤ +60°C) Gb
 
Approved for issue on behalf of the IECEx
Certification Body:
R S Sinclair

 
Position:General Manager


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 

 Certificate issued by:
Baseefa
Rockhead Business Park
Staden Lane
Buxton
Derbyshire
SK17 9RZ
United Kingdom


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx BAS 10.0080
 
Date of Issue:2012-02-01Issue No.: 2
 
Page 2 of 4
 
 Manufacturer:
HNL Engineering Limited
Dukesway
Teeside Industrial Estate
Thornaby
Cleveland
TS17 9LT
United Kingdom


 
 Additional Manufacturing location(s):
 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2007-10
Edition: 5
Explosive atmospheres - Part 0:Equipment - General requirements
IEC 60079-1 : 2007-04
Edition: 6
Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:
GB/BAS/ExTR10.0177/00GB/BAS/ExTR11.0040/00


Quality Assessment Report:

GB/BAS/QAR12.0004/00


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx BAS 10.0080
 
Date of Issue:2012-02-01Issue No.: 2
 
Page 3 of 4
 
 
Schedule
 
EQUIPMENT:
Equipment and systems covered by this certificate are as follows:
 
The ST1AD Liquid Level Transmitter comprises a number of pillar mounted printed circuit boards enclosed within a type 8092SM enclosure manufactured by International Metal Engineering Pte Limited to IECEx SIR 08.0025U.

The enclosure comprises a circular base with cable entry bosses and a threaded cover with a window.

The transmitter is rated up to 26 V d.c. 2.4W.

Cable entry holes are provided as specified on the certified drawings for the accommodation of flameproof cable entry devices, with or without the interposition of a flameproof thread adapter. Unused entries are to be fitted with certified flameproof stopping plugs.

T
he cable entry devices, thread adapters and stopping plugs shall be suitable for the equipment, the cable and the conditions of use and shall be certified as Equipment (not a Component).

 

 
CONDITIONS OF CERTIFICATION: NO
 
 


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx BAS 10.0080
 
Date of Issue:2012-02-01Issue No.: 2
 
Page 4 of 4
 
 
DETAILS OF CERTIFICATE CHANGES (for issues 1 and above):
 
Variation 2.1

This issue permits existing information (for example on Schedule Drawings) to be replaced by the revised certificate holders name and address. No other changes may be made to the certified design
 
 








Copyright © IEC-IECEx 2014 , Geneva Switzerland. All rights reserved.