This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.
This Unit verification certificate is issued as verification that the Apparatus identified on page 1, was assessed and tested and found to comply with the IEC Standard list below. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.
The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:
As this is a Unit Verification Certificate, no QAR is applicable as this certificate is specific to the items listed by serial number or other unique identification.
The Bayonet Housing Model BH 200 XF0142... made of aluminium or stainless steel, consists of several modules which can be assembled together to form one enclosure. The modules are for use with circuits in type of protection intrinsic safety "ia" or "iaD". Optionally the enclosure can be provided with a module in type of protection flameproof enclosures "d" and dust ignition protection by enclosure "t". The degree of protection of the enclosure is IP6X according to IEC 60529. Ambient temperature range and operating temperature range of the modules: -40 °C to +85 °C.For the complete model code, see Attachment 1.Special points for noting:- Power to the keypad fitted in the windowed cover shall be limited by intrinsic safety "i" to IEC 60079-11 and/or iaD to IEC 61241-11. - The flamepath at the bushing has a width of min. 13.9 mm and a gap of max. 0.118 mm.
For the complete model code, see Attachment 1.