IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

IECEx Certificate
of Conformity

 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com

 
Certificate No.:
IECEx IBE 11.0009 issue No.:0

Certificate history:

 
Status:
Current
 
Date of Issue:2011-11-08 Page 1 of 3


    
Applicant:
R. STAHL Schaltgeräte GmbH
Am Bahnhof 30
74653 Waldenburg
Germany


 
Electrical Apparatus:Portable lamp type 6148
Optional accessory:


 
Type of Protection:intrinsic safety, protection by enclosure


 
Marking: Ex ib IIC T4 Gb
Ex tb IIIC T75 °C Db
-20 °C ≤ Ta ≤ +50 °C
 
Approved for issue on behalf of the IECEx
Certification Body:
Prof. Tammo Redeker

 
Position:Head of cerification body


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 

 Certificate issued by:
IBExU Institut für Sicherheitstechnik GmbH
Certification Body
Fuchsmühlenweg 7
09599 Freiberg
Germany


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx IBE 11.0009
 
Date of Issue:2011-11-08Issue No.: 0
 
Page 2 of 3
 
 Manufacturer:
R. STAHL Schaltgeräte GmbH
Am Bahnhof 30
74653 Waldenburg
Germany


 
 Additional Manufacturing location(s):
 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2007-10
Edition: 5
Explosive atmospheres - Part 0:Equipment - General requirements
IEC 60079-11 : 2006
Edition: 5
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
IEC 60079-31 : 2008
Edition: 1
Explosive atmospheres – Part 31: Equipment dust ignition protection by enclosure 't'
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:
DE/IBE/ExTR11.0009/00


Quality Assessment Report:

DE/BVS/QAR10.0002/01


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx IBE 11.0009
 
Date of Issue:2011-11-08Issue No.: 0
 
Page 3 of 3
 
 
Schedule
 
EQUIPMENT:
Equipment and systems covered by this certificate are as follows:
 

  

The portable lamp is an explosion-protected electrical apparatus for use in areas of zones 1 and 21.It consists of a turnable head with LED illuminant and the bottom part with electronics and lead acid battery. Charging is carried out outside the explosive area. 

Technical data 

Ambient temperature range:                      -20 °C up to +50 °C

Degree of protection of the enclosure:     IP 66 according to IEC 60529 

Battery:                                                      lead acid battery 6 V max. 4.5 Ah

Charging voltage:                                      10 - 30 V DC   ( Um: 50 V )

 

 

 

 

 

 
CONDITIONS OF CERTIFICATION: NO
 
 







Copyright © IEC-IECEx 2013 , Geneva Switzerland. All rights reserved.