IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

leftca_pagelinks
IECEx Certificate
of Conformity

 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com

 
Certificate No.:
IECEx SIM 06.0012X issue No.:0

Certificate history:

 
Status:
Current
 
Date of Issue:2007-03-02 Page 1 of 3


    
Applicant:
Pepperl+Fuchs GB Ltd
77 Ripponden Road
Oldham, LANCASHIRE OL1 4EL
United Kingdom


 
Equipment:Z Series Diode Safety Barriers
Optional accessory:


 
Type of Protection:ia


 
Marking: [Ex ia] I/IIC
-20°C ≤ Tamb ≤ +60°C
IECEx SIM 06.0012X
 
Approved for issue on behalf of the IECEx
Certification Body:
Ashraf Chowdhury

 
Position:Principal Engineer - Certification


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 

 Certificate issued by:
Safety in Mines Testing and Research Station (Simtars)
2 Smith Street
REDBANK QLD 4301
Australia
au_sim.gif


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx SIM 06.0012X
 
Date of Issue:2007-03-02Issue No.: 0
 
Page 2 of 3
 
 Manufacturer:
Pepperl+Fuchs GmbH
Königsberger Allee 87
68307 Mannheim
Germany


 
 Additional Manufacturing location(s):
Pepperl+Fuchs Pte Ltd
18 Ayer Rajah Crescent
139942
Singapore
 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2000
Edition: 3.1
Electrical apparatus for explosive gas atmospheres - Part 0: General requirements
IEC 60079-11 : 1999
Edition: 4
Electrical apparatus for explosive gas atmospheres - Part 11: Intrinsic safety 'i'
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:
AU/SIM/ExTR07.0001/00


Quality Assessment Report:

DE/PTB/QAR06.0007/01DE/PTB/QAR06.0008/01


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx SIM 06.0012X
 
Date of Issue:2007-03-02Issue No.: 0
 
Page 3 of 3
 
 
Schedule
 
EQUIPMENT:
Equipment and systems covered by this certificate are as follows:
 

The Z Series Diode Safety Barriers are designed to restrict the transfer of energy from unspecified non-intrinsically safe circuits to intrinsically safe circuits by the limitation of voltage and current.

The series comprises single, dual or triple output shunt diode barriers in a single unit. Each barrier consists of fuse protected, triplicated zeners with resistive output current limitation. Components on which Intrinsic Safety depends are encapsulated.

Models covered by this certificate are listed in the Annex.

Manufacturer’s documents: Refer Annex

 
CONDITIONS OF CERTIFICATION: YES as shown below:
 
Entity parameters listed in the Annex apply to the apparatus.
 







Copyright © IEC-IECEx 2016 , Geneva Switzerland. All rights reserved.