Certificate of Conformity: IECEx SIR 08.0062


		IECEx Certificate of Conformity


	INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Ex COMPONENT CERTIFICATE UNIT VERIFICATION



	Certificate No.:	IECEx SIR 08.0062 issue No.: 3 Certificate history: Issue No. 4 (2012-10-29) Issue No. 3 (2011-10-18) Issue No. 2 (2010-12-17) Issue No. 1 (2010-10-4) Issue No. 0 (2009-10-29)

	Status:	Current

	Date of Issue:	2011-10-18		Page 1 of 4




	Applicant:

		Pepperl+Fuchs GmbH Lilienthalstrasse 200 68307 Mannheim Germany
	Ex Component:

	Equipment:	Pygmy Junction Box

	Optional accessory:



	Type of Protection:	Flameproof and Dust

	Marking:	Ex d IIC T6 Gb Ex tb III C T80 °C Db IP6X (Tamb = -40 °C to +50 °C )(5 W max) or Ex d IIC T5 Gb Ex tb III C T95 °C Db IP6X (Tamb = -40 °C to +50 °C )(15 W max) or Ex d IIC T4 GbEx tb III C Db T130 °C Db IP6X (Tamb = -40 °C to +50 °C )(20 W max) or +55 °C variant Ex d IIC T6 Gb (5W max) Ex tb III C T80 °C Db IP6X (Tamb = -40 °C to +55 °C )(5 W max) or Ex d IIC T4 Gb (15W max) Ex tb III C T130 °C Db IP6X (Tamb = -40 °C to +55 °C )(15 W max) or Ex d IIC T4 Gb (20W max) Ex tb III C Db T130 °C Db IP6X (Tamb = -40 °C to +55 °C )(20 W max)


	Approved for issue on behalf of the IECEx Certification Body:		D R Stubbings BA MIET

	Position:		Certification Manager

	Signature: (for printed version)

	Date:


	1. This certificate and schedule may only be reproduced in full. 2. This certificate is not transferable and remains the property of the issuing body. 3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.


Certificate issued by:

	SIRA Certification Service Rake Lane Eccleston Chester CH4 9JN United Kingdom


		IECEx Certificate of Conformity


Certificate No.:	IECEx SIR 08.0062

Date of Issue:	2011-10-18	Issue No.: 3

		Page 2 of 4

Manufacturer:

Pepperl+Fuchs GmbH
Lilienthalstrasse 200
68307 Mannheim
Germany

Additional Manufacturing location(s):

Pepperl+Fuchs GmbH
Werk B�hl
Bussmatten 10 - 12
77815 B�hl / Baden
Germany

Pepperl+Fuchs Manufacturing UK Ltd
Cornwallis Road
West Bromwich
West Midlands
B70 7DX
United Kingdom

Pepperl+Fuchs (Manufacturing) PTE LTD
18 Ayer Rajah Crescent
Singapore 139942
Singapore

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.

STANDARDS:
The apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

IEC 60079-0 : 2007-10 Edition: 5		Explosive atmospheres - Part 0:Equipment - General requirements
IEC 60079-1 : 2007-04 Edition: 6		Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
IEC 61241-1 : 2004 Edition: 1		Electrical apparatus for use in the presence of combustible dust - Part 1: Protection by enclosures "tD"

This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.

TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

Test Report:

GB/SIR/ExTR09.0167/00

GB/SIR/ExTR10.0193/00

GB/SIR/ExTR10.0194/00

GB/SIR/ExTR10.0302/00

GB/SIR/ExTR11.0242/00

Quality Assessment Report:


		IECEx Certificate of Conformity


Certificate No.:	IECEx SIR 08.0062

Date of Issue:	2011-10-18	Issue No.: 3

		Page 3 of 4

Schedule

EQUIPMENT:
Equipment and systems covered by this certificate are as follows

The Pygmy Junction Box is fitted with various terminal assemblies and utilises a Pygmy Enclosure certified as IECEx SIR 08.0084U, for further details refer to the Certificate Annexe.

SPECIFIC CONDITIONS OF USE: NO


		IECEx Certificate of Conformity


Certificate No.:	IECEx SIR 08.0062

Date of Issue:	2011-10-18	Issue No.: 3

		Page 3 of 4

EQUIPMENT(continued):


		IECEx Certificate of Conformity


Certificate No.:	IECEx SIR 08.0062

Date of Issue:	2011-10-18	Issue No.: 3

		Page 4 of 4

DETAILS OF CERTIFICATE CHANGES (for issues 1 and above):

Issue 1 – this Issue introduced the following changes:
1	The company name and address was changed and alternative manufacturing sites were recognised.
2	The use of alternative label materials.
3	The addition of a Datamatrix code on the label.
Issue 2 – this Issue introduced the following change:
1	The enclosures are approved to be manufactured in aluminium grade LM6 and stainless steel grade 316, a new Condition of Certification is introduced as a result of this.
Issue 3 – this Issue introduced the following changes:
1	The option to increase the ambient temperature range from +50°C to +55°C was approved; the marking section is amended accordingly.


		IECEx Certificate of Conformity


Certificate No.:	IECEx SIR 08.0062

Date of Issue:	2011-10-18	Issue No.: 3

		Page 4 of 4

Additional information:

Loading...