IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

leftca_pagelinks
IECEx Certificate
of Conformity

 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com

 
Certificate No.:
IECEx SIM 09.0005 issue No.:0
 
Status:
Cancelled
 
Date of Issue:2010-04-01 Page 1 of 4


    
Applicant:
Stott Industrial Supplies Pty Ltd
Unit 1 - 19 Balook Drive
BERESFIELD NSW 2322
Australia


 
Equipment:Alignment Laser Models SLX-635P and BLX-635
Optional accessory:


 
Type of Protection:ia


 
Marking: Model SLX-635P
Ex ia I/IIB 144°C
Model BLX-635
Ex ia I/IIB 136°C
IECEx SIM 09.0005
 
Approved for issue on behalf of the IECEx
Certification Body:
Ashraf Chowdhury

 
Position:Principal Engineer


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 

 Certificate issued by:
Safety in Mines Testing and Research Station (Simtars)
2 Smith Street
REDBANK QLD 4301
Australia
au_sim.gif


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx SIM 09.0005
 
Date of Issue:2010-04-01Issue No.: 0
 
Page 2 of 4
 
 Manufacturer:
Jatco (Australia) Pty Ltd t/a Applied Resolution Technologies Pty Ltd
Unit 12, 16 Yampi Way
WILLETTON WA 6155
Australia


 
 Additional Manufacturing location(s):

 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2004
Edition: 4.0
Electrical apparatus for explosive gas atmospheres - Part 0: General requirements
IEC 60079-11 : 2006
Edition: 5
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:
AU/SIM/ExTR09.0007/00


Quality Assessment Report:

AU/SIM/QAR10.0001/00


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx SIM 09.0005
 
Date of Issue:2010-04-01Issue No.: 0
 
Page 3 of 4
 
 
Schedule
 
EQUIPMENT:
Equipment and systems covered by this certificate are as follows:
 

NOTE: This Certificate is cancelled effective 4 November 2013 in accordance with a request from the ExCB. All products produced or installed prior to this date are not affected by this cancellation. Any comments may be directed to the appropriate Applicant or ExCB 

 

The Alignment Laser, Models SLX-635P and BLX-635, each comprise a laser module fitted with the laser diode package, encapsulated laser drive circuitry and a fuse. With the exception of the laser diode packages, the laser modules are identical for both laser types.

Model SLX-635P comprises a 1 mW red laser powered by two AA-size primary cells (Panasonic Industrial LR6 (GW)) located in a zinc-plated housing manufactured from hexagonal brass stock. The housing is fitted with a level-indicator vial on the top side and six recessed neodymium magnets in the base for magnetic mounting.

Model BLX-635 laser comprises a 5 mW laser module powered by three D-size cells (Panasonic Industrial LR20 (GW)) and alignment mechanism housed in a cylindrical bronze housing. The housing comprises two sections, the laser module / telescoping assembly section and the battery section. The battery section houses the cells, on/off switch mechanism and also incorporates mechanical reverse-polarity protection and a fuse. The battery section is detachable from the laser module / telescoping front section for replacing of the cells in the safe area.

 
SPECIFIC CONDITIONS OF USE: NO
 
 


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx SIM 09.0005
 
Date of Issue:2010-04-01Issue No.: 0
 
Page 4 of 4
 
 
Additional information:
 
Battery types used are as follows:

Model SLX-635P: Panasonic Industrial LR6 (GW), AA size

Model BLX-635: Panasonic Industrial LR20 (GW), D size
 
 








Copyright © IEC-IECEx 2017 , Geneva Switzerland. All rights reserved.