IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

leftca_pagelinks
IECEx Certificate
of Conformity

 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com

 
Certificate No.:
IECEx SIR 10.0102U issue No.: 0

Certificate history:

 
Status:
Current
 
Date of Issue:2010-07-14Page 1 of 3
 
 
Applicant:
International Metal Engineering Pte Ltd
Blk 13
Toa Payoh Lorong 8
# 06-05 Braddell Tech Park
Singapore
319261
Singapore
Equipment:8117P* Range of Enclosures
 
Optional accessory:
 
Type of Protection:Flameproof and Dust

 Marking: Ex d IIC Gb
Ex tb III C Db IP68
 
 
Approved for issue on behalf of the IECEx
Certification Body:
C Ellaby

 
Position:Certification Officer


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 

  Certificate issued by:
SIRA Certification Service
Rake Lane
Eccleston
Chester
CH4 9JN
United Kingdom


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx SIR 10.0102U
 
Date of Issue:2010-07-14Issue No.: 0
 
Page 2 of 3
  
Manufacturer:
International Metal Engineering Pte Ltd
Blk 13
Toa Payoh Lorong 8
# 06-05 Braddell Tech Park
Singapore
319261
Singapore


 
Additional Manufacturing location(s):

 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2007-10
Edition: 5
Explosive atmospheres - Part 0:Equipment - General requirements
IEC 60079-1 : 2007-04
Edition: 6
Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
IEC 60079-31 : 2008
Edition: 1
Explosive atmospheres – Part 31: Equipment dust ignition protection by enclosure 't'
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:

GB/SIR/ExTR10.0155/00


Quality Assessment Report:

GB/SIR/QAR07.0040/01


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx SIR 10.0102U
 
Date of Issue:2010-07-14Issue No.: 0
 
Page 3 of 3
 
Schedule
 EQUIPMENT:
Equipment and systems covered by this certificate are as follows
 
 

The 8117P* instrument enclosure, which has a maximum internal volume of 1 800 cm³, is a cylindrical, single compartment enclosure comprising a base and cover.   The enclosures are manufactured from cast aluminium with an epoxy paint finish.   The enclosures cover may be solid or contain a circular tempered glass window.   Each enclosure may have up to four conduit openings with entry sizes selected from ½” NPT, ¾” NPT, ½” BSP or M20x1.5.

ReferenceMaterial of constructionOption
8117PBAluminium, epoxy coatedBlind cover
8117PDAluminium, epoxy coatedWindow cover
The user/installer shall comply with the following special point for noting:
These component enclosures shall only be used within the temperature range of -40°C to +85°C.


 SPECIFIC CONDITIONS OF USE:   NO
 
 
 




Copyright © IEC-IECEx 2019 , Geneva Switzerland. All rights reserved.