IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

leftca_pagelinks
IECEx Certificate
of Conformity

 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com

 
Certificate No.:
IECEx SIR 10.0132X issue No.: 1
 
Status:
Current
 
Date of Issue:2013-04-30Page 1 of 4
 
 
Applicant:
International Metal Engineering Pte Ltd
Blk 13, Toa Payoh Lorong 8
#06-05 Braddell Tech Park
319261
Singapore
Equipment:95,96,98 and 99 Series temperature probe assemblies
 
Optional accessory:
 
Type of Protection:Flameproof and Dust

 Marking:

Ex d IIC T6 Gb
Ex tD A21 T85°C IP68*
(Ta = -40°C to +70°C)

Ex d IIC T6 Gb
Ex tb III C T85°C Db IP68*
(Ta = -40°C to +70°C)
Ex d IIC T6 Gb
Ex tb III C T85°C Db IP66/68**
(Ta = -40°C to +70°C)
(95 Series YTA enclosure only)(96, 98 and 99 Series)1080 Series Device Assembly.
* Dust protection and IP68 only applicable when probe end meets the Condition of Certification** IP66/68 is only met when the associated equipment is similarly rated.
 
 
Approved for issue on behalf of the IECEx
Certification Body:
A C Smith

 
Position:Certification Manager


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 

  Certificate issued by:
SIRA Certification Service
Rake Lane
Eccleston
Chester
CH4 9JN
United Kingdom


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx SIR 10.0132X
 
Date of Issue:2013-04-30Issue No.: 1
 
Page 2 of 4
  
Manufacturer:
International Metal Engineering Pte Ltd
Blk 13, Toa Payoh Lorong 8
#06-05 Braddell Tech Park
319261
Singapore


 
Additional Manufacturing location(s):

 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2004
Edition: 4.0
Electrical apparatus for explosive gas atmospheres - Part 0: General requirements
IEC 60079-0 : 2007-10
Edition: 5
Explosive atmospheres - Part 0:Equipment - General requirements
IEC 60079-0 : 2011
Edition: 6.0
Explosive atmospheres - Part 0: General requirements
IEC 60079-1 : 2007-04
Edition: 6
Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
IEC 60079-31 : 2008
Edition: 1
Explosive atmospheres – Part 31: Equipment dust ignition protection by enclosure 't'
IEC 61241-0 : 2004
Edition: 1
Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements
IEC 61241-1 : 2004
Edition: 1
Electrical apparatus for use in the presence of combustible dust - Part 1: Protection by enclosures "tD"
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:

GB/SIR/ExTR11.0001/00GB/SIR/ExTR13.0071/00


Quality Assessment Report:

GB/SIR/QAR07.0040/01GB/SIR/QAR07.0040/02GB/SIR/QAR07.0040/03


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx SIR 10.0132X
 
Date of Issue:2013-04-30Issue No.: 1
 
Page 3 of 4
 
Schedule
 EQUIPMENT:
Equipment and systems covered by this certificate are as follows
 
 

95, 96, 98 and 99 series temperature probe assembly

 
The temperature probe assembly comprises a flameproof nipple union fitted with a probe which houses the temperature sensor. This unit is fitted to an International Metal Engineering enclosure to complete the assembly. The probe is retained within the nipple by a spring.  The nipple union , probe and spring are stainless steel grade 316. The probe end of the nipple union is threaded to accommodate an optional protection of the probe such as a thermowell. The 1080 series enclosures may contain equipment limited to a maximum power dissipation of 3 W.
 
The union nipple assembly may be fitted to the following International Metal Engineering enclosures:
 
·          95 Series: Yokogawa YTA enclosures (IECEx KEM 07.0044)
·          96 Series: 1080SM and 1080 WM enclosures (IECEx SIR 09.0006U)
·          98 Series: 8080SM and 8080WM enclosures (IECEx SIR 08.0091X)
·          99 Series: 1080SM and 1080 WM enclosures (IECEx SIR 09.0006U)
 
For tables detailing part numbers see annexe


 SPECIFIC CONDITIONS OF USE:   YES as shown below:
 
 

1

96, 98 and 99 Series only: To meet the requirements of IEC 60079-31 and IEC 60529 for degree of protection IP68, the user shall ensure the probe end of the union nipple shall be threaded into a protection tube such as a thermowell to maintain the degree of protection IP68.

 

 


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx SIR 10.0132X
 
Date of Issue:2013-04-30Issue No.: 1
 
Page 4 of 4
 
 DETAILS OF CERTIFICATE CHANGES (for issues 1 and above):
 
 
Issue 1 – this Issue introduced the following change:
1.The introduction of the 1080 Series Device Assembly, the details of which can be found in the Annexe
 
 




Copyright © IEC-IECEx 2019 , Geneva Switzerland. All rights reserved.