IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

leftca_pagelinks
IECEx Certificate
of Conformity

 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com

 
Certificate No.:
IECEx SIR 10.0091X issue No.: 0
 
Status:
Current
 
Date of Issue:2010-08-05Page 1 of 3
 
 
Applicant:
International Metal Engineering Pte Ltd
Blk 13
Toa Payoh Lorong 8
# 06-05 Braddell Tech Park
Singapore
319261
Singapore
Equipment:5117 Range of Junction Boxes
 
Optional accessory:
 
Type of Protection:Flameproof and Dust

 Marking: Ex d IIC T6 Gb
Ex tb III C T85 °C Db IP68
(Ta-40 °C to +75 °C )
 
 
Approved for issue on behalf of the IECEx
Certification Body:
C Ellaby

 
Position:Certification Officer


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 

  Certificate issued by:
SIRA Certification Service
Rake Lane
Eccleston
Chester
CH4 9JN
United Kingdom


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx SIR 10.0091X
 
Date of Issue:2010-08-05Issue No.: 0
 
Page 2 of 3
  
Manufacturer:
International Metal Engineering Pte Ltd
Blk 13
Toa Payoh Lorong 8
# 06-05 Braddell Tech Park
Singapore
319261
Singapore


 
Additional Manufacturing location(s):

 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2007-10
Edition: 5
Explosive atmospheres - Part 0:Equipment - General requirements
IEC 60079-1 : 2007-04
Edition: 6
Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
IEC 60079-30-1 : 2007-01
Edition: 1
Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:

GB/SIR/ExTR10.0155/00


Quality Assessment Report:

GB/SIR/QAR07.0040/01


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx SIR 10.0091X
 
Date of Issue:2010-08-05Issue No.: 0
 
Page 3 of 3
 
Schedule
 EQUIPMENT:
Equipment and systems covered by this certificate are as follows
 
 

The 5117 range of Junction Boxes utilise the 7117 series of empty enclosures, certificate number IECEx SIR 09.0118U populated with up to 12 Phoenix Contact UK3N terminals, each Junction Box may have up to four conduit openings with entry sizes selected from ½” NPT, ¾” NPT, 1” NPT, ½” BSP, M20 x 1.5 or M25 x 1.5.  The range is defined below:

ReferenceMaterial of constructionOption
5117 STStainless steelWindow cover
5117 SMStainless steelWindow cover
5117 TTStainless steelBlind cover
5117 TMStainless steelBlind cover
5117 WTAluminium, epoxy coatedWindow cover
5117 WMAluminium, epoxy coatedWindow cover
5117 ATAluminium, epoxy coatedBlind cover
5117 AMAluminium, epoxy coatedBlind cover


 SPECIFIC CONDITIONS OF USE:   YES as shown below:
 
 

1

The power dissipation within the junction box shall be limited to a maximum of 3.5 W.
 




Copyright © IEC-IECEx 2019 , Geneva Switzerland. All rights reserved.