Ex d IIB+H2 T3 Gb IP66
This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.
This Unit verification certificate is issued as verification that the Apparatus identified on page 1, was assessed and tested and found to comply with the IEC Standard list below. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.
The apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:
As this is a Unit Verification Certificate, no QAR is applicable as this certificate is specific to the items listed by serial number or other unique identification.
The EL100 Linear Actuator consists of an enclosure assembly, incorporating a resolver, stator, terminal blocks, thermal switch and rear brake. The enclosure assembly incorporates a roller screw mechanism within the armature of a brushless servo motor. The EL100 Linear is connected to a servo drive controller which commutates the motor and controls the torque, speed and position of the actuator. This rotary motion is translated into linear motion by an internal planetary roller screw mechanism. The actuator and a controller combine to provide a complete motion control system. The electrical to mechanical power conversion and position feedback devices are contained in the actuator.
Conditions of certification
Model Code information