IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

leftca_pagelinks
IECEx Certificate
of Conformity

 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com

 
Certificate No.:
IECEx SIR 09.0118U issue No.: 0
 
Status:
Current
 
Date of Issue:2010-08-05Page 1 of 4
 
 
Applicant:
International Metal Engineering Pte Ltd
Blk 13
Toa Payoh Lorong 8
# 06-05 Braddell Tech Park
Singapore
319261
Singapore
Equipment:7117 ** and 8117 ** Ranges of Enclosures
 
Optional accessory:
 
Type of Protection:Flameproof and Dust

 Marking: Ex d IIC Gb
Ex tb III C Db IP68
 
 
Approved for issue on behalf of the IECEx
Certification Body:
C Ellaby

 
Position:Certification Officer


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 

  Certificate issued by:
SIRA Certification Service
Rake Lane
Eccleston
Chester
CH4 9JN
United Kingdom


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx SIR 09.0118U
 
Date of Issue:2010-08-05Issue No.: 0
 
Page 2 of 4
  
Manufacturer:
International Metal Engineering Pte Ltd
Blk 13
Toa Payoh Lorong 8
# 06-05 Braddell Tech Park
Singapore
319261
Singapore


 
Additional Manufacturing location(s):

 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2007-10
Edition: 5
Explosive atmospheres - Part 0:Equipment - General requirements
IEC 60079-1 : 2007-04
Edition: 6
Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
IEC 60079-31 : 2008
Edition: 1
Explosive atmospheres – Part 31: Equipment dust ignition protection by enclosure 't'
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:

GB/SIR/ExTR10.0155/00


Quality Assessment Report:

GB/SIR/QAR07.0040/01


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx SIR 09.0118U
 
Date of Issue:2010-08-05Issue No.: 0
 
Page 3 of 4
 
Schedule
 EQUIPMENT:
Equipment and systems covered by this certificate are as follows
 
 
 7117 **, Range of Enclosures
The 7117 ** instrument enclosure, which has a maximum internal volume of 780 cm³, are cylindrical, single compartment enclosures comprising a base and cover.  The enclosures are manufactured from stainless steel or cast aluminium with an optional epoxy paint finish. The enclosure covers may contain a circular tempered glass window. Each 7117 enclosure may have up to four conduit openings. with entry sizes selected from ½” NPT, ¾” NPT, 1” NPT, ½” BSP, M20 x 1.5 or M25 x 1.5.
 8117 **, Range of Enclosures
The 8117 ** series instrument enclosure, which has a maximum internal volume of 990 cm³, are cylindrical single compartment enclosures comprising a base and cover.  The enclosures are manufactured from stainless steel or cast aluminium with an epoxy paint finish. The enclosure covers may contain a circular tempered glass window. Each 8117 enclosure may have up to three conduit openings with entry sizes selected from ½” NPT, ¾” NPT, 1” NPT, ½” BSP, M20 x 1.5 or M25 x 1.5.
Special Point For Noting
 These component enclosures shall only be used within the temperature range of -40°C to +85°C.


 SPECIFIC CONDITIONS OF USE:   NO
 
 
 


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx SIR 09.0118U
 
Date of Issue:2010-08-05Issue No.: 0
 
Page 4 of 4
 
 EQUIPMENT(continued):
 
 

7117 ** Range

ReferenceMaterial of constructionOption
7117 STStainless steelWindow cover
7117 SMStainless steelWindow cover
7117 TTStainless steelBlind cover
7117 TMStainless steelBlind cover
7117 WTAluminium, epoxy coatedWindow cover
7117 WMAluminium, epoxy coatedWindow cover
7117 ATAluminium, epoxy coatedBlind cover
7117 AMAluminium, epoxy coatedBlind cover
7117 CTAluminium, cast finishedWindow cover
7117 CMAluminium, cast finishedWindow cover
7117 NTAluminium, cast finishedBlind cover
7117 NMAluminium, cast finishedBlind cover
8117 ** Range
ReferenceMaterial of constructionOption
8117 STStainless steelWindow cover
8117 SMStainless steelWindow cover
8117 TTStainless steelBlind cover
8117 TMStainless steelBlind cover
8117 WTAluminium, epoxy coatedWindow cover
8117 WMAluminium, epoxy coatedWindow cover
8117 ATAluminium, epoxy coatedBlind cover
8117 AMAluminium, epoxy coatedBlind cover
 
 




Copyright © IEC-IECEx 2019 , Geneva Switzerland. All rights reserved.