IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

leftca_pagelinks
IECEx Certificate
of Conformity

 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com

 
Certificate No.:
IECEx SIR 10.0142 issue No.: 1
 
Status:
Current
 
Date of Issue:2012-12-14Page 1 of 4
 
 
Applicant:
International Metal Engineering
Blk 13 Toa Payoh Lorong 8
#06-05 Braddell Tech Park
319261
Singapore
Equipment:8092 Range Of Indicators and Transmitters
 
Optional accessory:
 
Type of Protection:Flameproof and Dust

 Marking: Ex d IIC T5 Gb
Ex tb III C T100°C Db

Ta = -40°C to + 70°C

OR

Ex d IIC T6 Gb
Ex tb III C T85°C Db
Ta = -40°C to +65°C

 
 
Approved for issue on behalf of the IECEx
Certification Body:
C Ellaby

 
Position:Deputy Certification Manager


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 

  Certificate issued by:
SIRA Certification Service
Rake Lane
Eccleston
Chester
CH4 9JN
United Kingdom


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx SIR 10.0142
 
Date of Issue:2012-12-14Issue No.: 1
 
Page 2 of 4
  
Manufacturer:
International Metal Engineering
Blk 13 Toa Payoh Lorong 8
#06-05 Braddell Tech Park
319261
Singapore


 
Additional Manufacturing location(s):

 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2011
Edition: 6.0
Explosive atmospheres - Part 0: General requirements
IEC 60079-1 : 2007-04
Edition: 6
Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
IEC 60079-31 : 2008
Edition: 1
Explosive atmospheres – Part 31: Equipment dust ignition protection by enclosure 't'
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:

GB/SIR/ExTR10.0278/00GB/SIR/ExTR12.0264/00


Quality Assessment Report:

GB/SIR/QAR07.0040/01GB/SIR/QAR07.0040/02


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx SIR 10.0142
 
Date of Issue:2012-12-14Issue No.: 1
 
Page 3 of 4
 
Schedule
 EQUIPMENT:
Equipment and systems covered by this certificate are as follows
 
 

The 8092 Range Of Indicators and Transmitters are cylindrical single compartment enclosures comprising a base and threaded cover containing the equipment electronics. The enclosures are manufactured from stainless steel or cast aluminium that may have an epoxy paint coating. The cover may be blind or contain a circular tempered glass window.  Each enclosure may have a number of cable entry openings and sizes as detailed in the design options.  The 8092 Range Of Indicators and Transmitters have a maximum power rating of 7.5 W.  The enclosures meet the requirements of IP 66.

 
Design Options
The 8092 Range Of Indicators and Transmitters may utilise the following entry threadforms
½” NPT
¾” NPT
1” NPT
½” BSP
M20 x 1.5
M25 x 1.5
M27 x 1.5

 



 SPECIFIC CONDITIONS OF USE:   NO
 
 
 


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx SIR 10.0142
 
Date of Issue:2012-12-14Issue No.: 1
 
Page 4 of 4
 
 DETAILS OF CERTIFICATE CHANGES (for issues 1 and above):
 
 
Issue 1 – this Issue introduced the following change:
1Following appropriate re-assessment to demonstrate compliance with the requirements of later standards, the following, previously listed documents, IEC 60079‑0:2004 Ed 4, IEC 61241-0:2004 Ed 1 and EN 61241‑1:2004 Ed 1, were replaced by those currently specified, the marking was amended accordingly.
 
 




Copyright © IEC-IECEx 2019 , Geneva Switzerland. All rights reserved.