This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.
This Unit verification certificate is issued as verification that the Apparatus identified on page 1, was assessed and tested and found to comply with the IEC Standard list below. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.
The apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:
As this is a Unit Verification Certificate, no QAR is applicable as this certificate is specific to the items listed by serial number or other unique identification.
The 1080 Instrument Housings are cylindrical single compartment enclosures comprising a base and cover with a maximum internal volume of 140 cubic cm. The enclosures are manufactured from cast aluminium or stainless steel. Some cast aluminium versions are painted with silver paint or epoxy paint. The cover is blank and fitted with a stainless steel chain which is attached to the cover and base. Each enclosure may have a number of conduit openings and sizes Both enclosures have passed a 4 times reference pressure test of 53 bar. Therefore a routine pressure test is not required. See table in the annexe