IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

leftca_pagelinks
IECEx Certificate
of Conformity

 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com

 
Certificate No.:
IECEx SIR 08.0091X issue No.: 1
 
Status:
Current
 
Date of Issue:2012-02-08Page 1 of 4
 
 
Applicant:
International Metal Engineering PTE Ltd
Blk 13 Toa Payoh Lorong 8
#06-05, Braddell Tech Park
Singapore
Equipment:8080 Range of Indicators and Transmitters
 
Optional accessory:
 
Type of Protection:Flameproof and Dust

 Marking: Ex d I Mb or Ex d IIC T6 Gb
And
Ex tb III C T85°C Db IP68
Ta = -40°C to +60°C
 
 
Approved for issue on behalf of the IECEx
Certification Body:
C Ellaby

 
Position:Deputy Certification Manager


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 

  Certificate issued by:
SIRA Certification Service
Rake Lane
Eccleston
Chester
CH4 9JN
United Kingdom


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx SIR 08.0091X
 
Date of Issue:2012-02-08Issue No.: 1
 
Page 2 of 4
  
Manufacturer:
International Metal Engineering PTE Ltd
Blk 13 Toa Payoh Lorong 8
#06-05, Braddell Tech Park
Singapore


 
Additional Manufacturing location(s):

 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2007-10
Edition: 5
Explosive atmospheres - Part 0:Equipment - General requirements
IEC 60079-1 : 2007-04
Edition: 6
Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
IEC 60079-31 : 2008
Edition: 1
Explosive atmospheres – Part 31: Equipment dust ignition protection by enclosure 't'
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:

GB/SIR/ExTR09.0001/00GB/SIR/ExTR12.0026/00


Quality Assessment Report:

GB/SIR/QAR07.0040/00GB/SIR/QAR07.0040/01GB/SIR/QAR07.0040/02


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx SIR 08.0091X
 
Date of Issue:2012-02-08Issue No.: 1
 
Page 3 of 4
 
Schedule
 EQUIPMENT:
Equipment and systems covered by this certificate are as follows
 
 

The 8080 Range are cylindrical single compartment enclosures comprising a base and cover with a maximum internal volume of 280 cm cubed. The enclosures are manufactured from cast aluminium or stainless steel. Some cast aluminium versions are painted with epoxy paint. The cover may be blank or have a window fitted. Each enclosure may have up to 3 conduit openings, these conduit openings may be a combination of ½” NPT, ¾” NPT, ½” BSP, M16 x 2, M20 x 1.5. The enclosures may contain equipment limited to a maximum power dissipation of 2.2W.

The stainless steel version of the 8080 range may also be used in Mining applications
The Manufacturer shall note the following condition of manufacture:
1.The 8080 enclosures, which are made from cast aluminium and fitted with a window assembly, shall be subjected to a routine overpressure test of 17.2 bar for at least 10 seconds as required by clause 16 of IEC 60079-1 and EN 60079-1. There shall be no leakage, permanent deformation or damage.
2.These enclosures shall not be fitted with batteries or any means for the user to install such devices


 SPECIFIC CONDITIONS OF USE:   YES as shown below:
 
 

1.

Only the stainless steel version of the 8080 enclosures can be used as Mining equipment.
 


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx SIR 08.0091X
 
Date of Issue:2012-02-08Issue No.: 1
 
Page 4 of 4
 
 DETAILS OF CERTIFICATE CHANGES (for issues 1 and above):
 
 
Issue 1 – this Issue introduced the following changes:
1The addition of information to label drawings that shows specific model numbers, corresponding electrical ratings and marking relevant to other approvals. 
2The arrangement of the internal parts was clarified.
3The addition of a Condition of Manufacture that excludes the use of batteries.
4It was recognised that the equipment complies with IEC 60079-31:2008 Ed 1.
 
 




Copyright © IEC-IECEx 2019 , Geneva Switzerland. All rights reserved.