Certificate history:
This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.
This Unit verification certificate is issued as verification that the Apparatus identified on page 1, was assessed and tested and found to comply with the IEC Standard list below. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.
STANDARDS: The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:
As this is a Unit Verification Certificate, no QAR is applicable as this certificate is specific to the items listed by serial number or other unique identification.
Explosion protected compression -glass- sealed electrical penetration
Types: SL 14.625.007-010, SL 14.625.017-010, SL 14.625.047-010
Rated Voltage: 28VAC. Rated Current: 4Auncooled; Allowable cable cross section: up to 1,5mm2; Design Pressure: 50 bar; Ambient Temperature Range: -50°C to +65°C
The name of the electrical apparatus was changed into SL 14.625.XX7-010. The certificate covers now the types SL 14.625.007-010, SL 14.625.017-010 and SL 14.625.047-010.
SL 14.625.017-010 and SL 14.625.047-010 are the same as SL 14.625.007-010 with an addittional adapter flange. The added parts and the changes do not have an effect on the explosion protection.
