IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

IECEx Certificate
of Conformity
 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com
 
Certificate No.:
IECEx PTB 06.0062U issue No.:2
 
Status:
Current
 
Date of Issue:2012-01-26 Page 1 of 4


    
Applicant:
R. STAHL Schaltgeräte GmbH
Am Bahnhof 30
74638 Waldenburg
Germany


 
Electrical Apparatus:Circuit breaker type 8562/5.-....-...
Optional accessory:


 
Type of Protection:Increased Safety "e", Flameproof Enclosures "d"


 
Marking: Ex de IIC resp. Ex de I
 
Approved for issue on behalf of the IECEx
Certification Body:		Dr. Ing. Uwe Klausmeyer

 
Position:Head of Section "Flameproof Enclosures"


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 
 Certificate issued by:
Physikalisch-Technische Bundesanstalt (PTB)
Bundesallee 100
38116 Braunschweig
Germany


- PAGE BREAK -

IECEx Certificate
of Conformity
 
Certificate No.:IECEx PTB 06.0062U
 
Date of Issue:2012-01-26Issue No.: 2
 
Page 2 of 4
 
 Manufacturer:
R. STAHL Schaltgeräte GmbH
Am Bahnhof 30
74638 Waldenburg
Germany


 
 Additional Manufacturing location(s):
 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2004
Edition: 4.0		Electrical apparatus for explosive gas atmospheres - Part 0: General requirements
IEC 60079-1 : 2001
Edition: 4		Electrical apparatus for explosive gas atmospheres - Part 1: Flameproof enclosures 'd'
IEC 60079-7 : 2001
Edition: 3		Electrical apparatus for explosive gas atmospheres - Part 7: Increased safety 'e'
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:
DE/PTB/ExTR06.0050/00


Quality Assessment Report:

DE/BVS/QAR10.0002/02


- PAGE BREAK -

IECEx Certificate
of Conformity
 
Certificate No.:IECEx PTB 06.0062U
 
Date of Issue:2012-01-26Issue No.: 2
 
Page 3 of 4
 
 
Schedule
 
EQUIPMENT:
Equipment and systems covered by this certificate are as follows:
 
Description of equipment

The circuit breaker, type 8562/5.-….-… is an electric equipment of type of protection Flameproof enclosure “d”, which is designed to accommodate protective components. The circuit breaker is manufactured in four sizes. Connection is by means of the integrated terminals.

Nomenclature

Circuit breaker
Type
8562/5a-bcde-fgh
5
Circuit breaker
a
Enclosure size (width)
1 = 36 mm
2 = 54 mm
3 = 72 mm
4 = 92 mm
b
Number of Poles
1 = 1-pole
2 = 2-pole
3 = 3-pole
4 = 3-pole + N
5 = 1-pole + N
6 = 4-pole
c, d
Protective Device
01 = MCB
02 = MCB
03 = MCB
04 = MCB
05 = MCB/RCD
06 = MCB/RCD
07 = MCB/RCD
08 = MCB/RCD
09 = RCD
10 = RCD
11 = RCD
12 = RCD
13 = MCB/RCD
14 = MCB/RCD
15 = MCB AC/DC
16 = MCB AC/DC
17 = RCD
18 = MCB
19 = MCB
21 = MCB
22 = MCB
23 = MCB
25 = MCB/RCD
26 = MCB/RCD
27 = MCB/RCD
28 = MCB/RCD
30 = MCB/RCD
33 = MCB/RCD
34 = MCB/RCD

 

B-Characteristic
B-Characteristic
C-Characteristic
C-Characteristic
B-Characteristic
B-Characteristic
C-Characteristic
C-Characteristic

 

 

 

 

B-Characteristic
C-Characteristic
B-Characteristic
C-Characteristic

 

B-Characteristic
C-Characteristic
D-Characteristic
D-Characteristic
D-Characteristic
B-Characteristic
B-Characteristic
C-Characteristic
C-Characteristic
C-Characteristic
B-Characteristic
C-Characteristic

 

  6 kA
10 kA
  6 kA
10 kA
  6 kA / 0.03 A
  6 kA / 0.3 A
  6 kA / 0.03 A
  6 kA / 0.3 A
0.01 A
0.03 A
0.3 A
0.5 A
  6 kA / 0.01 A
  6 kA / 0.01 A
  6 kA
  6 kA
0.1 A
10 kA, 480 V
10 kA, 480 V
  6 kA
10 kA
10 kA, 480 V
10 kA / 0.03 A
10 kA / 0.3 A
10 kA / 0.03 A
10 kA / 0.3 A
  6 kA / 0.03 A
10 kA / 0.01 A
10 kA / 0.01 A
e, f, g, h
numerals or letters without influence to explosion-protection
     

Technical data

Rated insulation voltage
up to
550 V
Rated operating voltage, main contacts
up to
440 V
Rated operating voltage, auxiliary contacts
up to
250 V
Rated current Ie, main contacts
max.
63 A
Rated current Ie, auxiliary contacts
max.
5 A
Thermal limit current for temperature class

 

T6
T5
T4
Fuse with fault current circuit breaker

 

13 A
40 A
63 A
Circuit breaker

 

13 A
32 A
40 A
Fault current circuit breaker

 

 

40 A
63 A
Rated cross section, main contact
max.
 10 mm2
Rated cross section, auxiliary contact
max.
1.5 mm2
The circuit breaker is designed for 110 °C temperature resistance

Notes for installation and operation

The circuit breaker shall be fitted in an enclosure that meets the requirements of an approved type of protection in accordance with IEC 60079-0, section 1.

When installing the circuit breaker in an enclosure designed to type of protection Increased Safety “e” as specified in IEC 60079-7, the clearance and creepage distances shown in section 4.4, section 4.5, and table 1 shall be duly considered.

 
CONDITIONS OF CERTIFICATION: NO
 
 


- PAGE BREAK -

IECEx Certificate
of Conformity
 
Certificate No.:IECEx PTB 06.0062U
 
Date of Issue:2012-01-26Issue No.: 2
 
Page 4 of 4
 
 
DETAILS OF CERTIFICATE CHANGES (for issues 1 and above):
 
New QAR
 
 








Copyright © IEC-IECEx 2013 , Geneva Switzerland. All rights reserved.