IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

IECEx Certificate
of Conformity

 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com

 
Certificate No.:
IECEx BKI 08.0014 issue No.:1
 
Status:
Current
 
Date of Issue:2011-09-19 Page 1 of 4


    
Applicant:
Cooper Crouse Hinds GmbH
previously CEAG Sicherheitstechnik GmbH
Neuer Weg Nord 49
D-69412 Eberbach, Germany
Germany


 
Electrical Apparatus:Switchgear
Optional accessory:Type GHG 63. 1…R….


 
Type of Protection:General requirements, Flameproof enclosures, Increased safety, Dust explosion protection


 
Marking: Ex de IIC T5 or T6 Gb or
Ex de IIC T55°C Db
-20 °C ≤ Tamb ≤ +40 °C at Ie ≤ 16 A
-20 °C ≤ Tamb ≤ +55 °C at 16A ≤ Ie ≤ 25A
Ex tD A21 IP66 T 55 °C
 
Approved for issue on behalf of the IECEx
Certification Body:
Janos FEJES

 
Position:Director


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 

 Certificate issued by:
Testing Station for Explosion Proof Equipment
H 1037 BUDAPEST
MIKOVINY S.u. 2-4
Hungary


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx BKI 08.0014
 
Date of Issue:2011-09-19Issue No.: 1
 
Page 2 of 4
 
 Manufacturer:
Cooper Crouse-Hinds GmbH
Neuer Weg Nord 49
D-69412 Eberbach, Germany
Germany


 
 Additional Manufacturing location(s):
 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2004
Edition: 4.0
Electrical apparatus for explosive gas atmospheres - Part 0: General requirements
IEC 60079-1 : 2003
Edition: 5
Electrical apparatus for explosive gas atmospheres - Part 1: Flameproof enclosure 'd'
IEC 60079-7 : 2001
Edition: 3
Electrical apparatus for explosive gas atmospheres - Part 7: Increased safety 'e'
IEC 61241-0 : 2004
Edition: 1
Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements
IEC 61241-1 : 2004
Edition: 1
Electrical apparatus for use in the presence of combustible dust - Part 1: Protection by enclosures "tD"
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:
HU/BKI/ExTR08.0013/00


Quality Assessment Report:

DE/BVS/QAR11.0009/00HU/BKI/QAR08.0001/00


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx BKI 08.0014
 
Date of Issue:2011-09-19Issue No.: 1
 
Page 3 of 4
 
 
Schedule
 
EQUIPMENT:
Equipment and systems covered by this certificate are as follows:
 
The switchgear of type GHG 63. 1… R… is composed of an enclosure of the type of protection increased safety “e” with incorporated switching, measuring or supply module with integrated terminals.

The switching device type GHG 63. 1…R…. may now also be used in areas where potentially explosive atmospheres with dust/air mixtures may occasionally occur.

See details in Addendum to IECEx BKI 08.0014.

 
CONDITIONS OF CERTIFICATION: NO
 
 


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx BKI 08.0014
 
Date of Issue:2011-09-19Issue No.: 1
 
Page 4 of 4
 
 
DETAILS OF CERTIFICATE CHANGES (for issues 1 and above):
 
new QAR
 
 








Copyright © IEC-IECEx 2013 , Geneva Switzerland. All rights reserved.