IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

leftca_pagelinks
IECEx Certificate
of Conformity

 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com

 
Certificate No.:
IECEx CML 16.0046X issue No.: 1
 
Status:
Current
 
Date of Issue:2016-07-21Page 1 of 4
 
 
Applicant:
Pepperl + Fuchs GmbH
Lilienthalstraße 200
68307 Mannheim
Germany
Equipment:PM* Series of Panel Mount Control Units
 
Optional accessory:
 
Type of Protection:Ex "d", "e", "t"

 Marking:

Ex d e IIC T6 Gb

Ex tb III C T80°C Db

-40°C  Ta  +50°C

 
 
Approved for issue on behalf of the IECEx
Certification Body:
H M Amos MIET

 
Position:Technical Manager


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 

  Certificate issued by:
Certification Management Limited
Unit 1, Newport Business Park
New Port Road
Ellesmere Port, CH65 4LZ
United Kingdom


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx CML 16.0046X
 
Date of Issue:2016-07-21Issue No.: 1
 
Page 2 of 4
  
Manufacturer:
Pepperl + Fuchs GmbH
Lilienthalstraße 200
68307 Mannheim
Germany


 
Additional Manufacturing location(s):

 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2011
Edition: 6.0
Explosive atmospheres - Part 0: General requirements
IEC 60079-1 : 2007-04
Edition: 6
Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
IEC 60079-31 : 2008
Edition: 1
Explosive atmospheres – Part 31: Equipment dust ignition protection by enclosure 't'
IEC 60079-7 : 2006-07
Edition: 4
Explosive atmospheres - Part 7: Equipment protection by increased safety "e"
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:

GB/CML/ExTR16.0056/00GB/CML/ExTR16.0093/00


Quality Assessment Report:

DE/PTB/QAR06.0015/07


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx CML 16.0046X
 
Date of Issue:2016-07-21Issue No.: 1
 
Page 3 of 4
 
Schedule
 EQUIPMENT:
Equipment and systems covered by this certificate are as follows
 
 

The PM* Series of Panel Mount Control Units have a protection type 'Ex d e' and 'Ex tb'. The enclosure of these products comprises of a plastic protective housing with a cable gland integrated in to the wall. An operation head which is certified as an Ex component is installed to suit the application.

For full description and Conditions of Manufacture, refer to certificate Annex.



 SPECIFIC CONDITIONS OF USE:   YES as shown below:
 
 

Refer to certificate Annex

 


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx CML 16.0046X
 
Date of Issue:2016-07-21Issue No.: 1
 
Page 4 of 4
 
 DETAILS OF CERTIFICATE CHANGES (for issues 1 and above):
 
 

Issue 1

This Issue introduced the following changes:

1

Changes to the equipment name/part number references and minor administrative alterations to the equipment Description and conditions of certification, in line with the model reference changes.

 

 
 




Copyright © IEC-IECEx 2019 , Geneva Switzerland. All rights reserved.