IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

IECEx Certificate
of Conformity
 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com
 
Certificate No.:
IECEx CSA 06.0011X issue No.:5
 
Status:
Current
 
Date of Issue:2011-11-21 Page 1 of 4


    
Applicant:
BW Technologies by Honeywell
2840 - 2nd Ave S.E.
Calgary, Alberta T2A 7X9
Canada


 
Electrical Apparatus:M5-XWT1T2-R-P-D-A-B-CC, M5PID-XWT1T2-R-P-D-A-B-CC, M5IR-XWT1T2 –R-P-D-A-B-CC
Optional accessory:


 
Type of Protection:Ex ia (M5 and M5PID); Ex d ia (M5IR)


 
Marking: - Ex d ia IIC (M5IR)
- Ex ia IIC (M5 and M5PID)
- Temperature Code: Duracell MN1500 = T-Code T4; Energizer E91 = T-Code 135.3°C; Lithium Polymer Rechargeable Battery pack “M5-BAT08” or “M5-BAT08B”; T-Code T4; Ambient Range –20 to + 50°C.
 
Approved for issue on behalf of the IECEx
Certification Body:		Dorin Stochitoiu

 
Position:Technical Advisor


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 
 Certificate issued by:
CSA International
178 Rexdale Boulevard
Toronto, Ontario M9W IR3
Canada
and
1707 - 94th Street
Edmonton, AB T6N 1E6
Canada


- PAGE BREAK -

IECEx Certificate
of Conformity
 
Certificate No.:IECEx CSA 06.0011X
 
Date of Issue:2011-11-21Issue No.: 5
 
Page 2 of 4
 
 Manufacturer:
BW Technologies by Honeywell
2840 - 2nd Ave S.E.
Calgary, Alberta T2A 7X9
Canada


 
 Additional Manufacturing location(s):
Honeywell Analytics Ltd.
Hatch Pond House
4 Stinsford Rd
Nuffield Industrial Estate
Poole, Dorset BH17 0RZ
United Kingdom
 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2011
Edition: 6.0		Explosive atmospheres - Part 0: General requirements
IEC 60079-1 : 2007-04
Edition: 6		Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
IEC 60079-11 : 2011
Edition: 6.0		Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:
CA/CSA/ExTR06.0001/01CA/CSA/ExTR07.0001/00CA/CSA/ExTR07.0001/02CA/CSA/ExTR08.0001/00CA/CSA/ExTR08.0001/02CA/CSA/ExTR08.0001/03


Quality Assessment Report:

GB/BAS/QAR07.0043/03US/UL/QAR06.0006/04


- PAGE BREAK -

IECEx Certificate
of Conformity
 
Certificate No.:IECEx CSA 06.0011X
 
Date of Issue:2011-11-21Issue No.: 5
 
Page 3 of 4
 
 
Schedule
 
EQUIPMENT:
Equipment and systems covered by this certificate are as follows:
 

M5-XWT1T2-R-P-D-A-B-CC; M5PID-XWT1T2-R-P-D-A-B-CC; M5IR-XWT1T2-R-P-D-A-B-CC

X          =          Indicates the Oxygen Sensor
W         =          Indicates the Combustible Sensor
T1         =          Indicates the Interchangeable Toxic Sensor (1st Sensor)
T2         =          Indicates the Interchangeable Toxic Sensor (2nd Sensor)
R          =          Battery Option
P          =          Sampling Method
D         =          Datalogging Capability
A         =          Custom parameters, non effecting I.S.
B          =          Custom parameters, non effecting I.S.
CC       =          Custom parameters, non effecting I.S
 
CONDITIONS OF CERTIFICATION: YES as shown below:
 
- Warning: Batteries must only be changed in Non-Hazardous Area (For Alkaline battery equipped models)
- Use approved 1.5V AA Batteries only. See Manual for approved listing. (For Alkaline battery equipped models)
- WARNING: For use with GasAlertMicro 5 instruments ONLY.  Battery must only be charged in a non-hazardous area. (For Lithium Polymer Rechargeable Battery pack “M5-BAT08” or “M5-BAT08B” equiped models)
 


- PAGE BREAK -

IECEx Certificate
of Conformity
 
Certificate No.:IECEx CSA 06.0011X
 
Date of Issue:2011-11-21Issue No.: 5
 
Page 4 of 4
 
 
DETAILS OF CERTIFICATE CHANGES (for issues 1 and above):
 

Issue 1 - update to add new piezo buzzer, EEPROM change and alternate memory cards

Issue 2 - update to add lithium polymer battery pack

Issue 3 - minor circuit changes plus addition of PID and electrochemical sensors.

Issue 4 - update to revise temperature code ratings based on battery testing in a 50°C ambient

Issue 5 - update to revise pump motor, revision to main board layout and add alternate manufacturing location

 
 








Copyright © IEC-IECEx 2013 , Geneva Switzerland. All rights reserved.