IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

IECEx Certificate
of Conformity
 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com
 
Certificate No.:
IECEx KOS 07.0003X issue No.:5
 
Status:
Current
 
Date of Issue:2009-10-08 Page 1 of 4


    
Applicant:
Hyundai Heavy Industries CO., LTD.
#1, Cheonha-Dong, Dong-Ku, Ulsan, 617-060
Korea, Republic of


 
Electrical Apparatus:Three-Phase Induction Electric Motor HDE 315 Series
Optional accessory:


 
Type of Protection:Flameproof Enclosure "d"


 
Marking: Ex d IIB T4
 
Approved for issue on behalf of the IECEx
Certification Body:		Noh, Min-Ki

 
Position:President


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 
 Certificate issued by:
Korea Occupational Safety and Health Agency (KOSHA)
34-4 Kusan-dong
Pupyong-gu
Inchon 403-711
Korea, Republic of


- PAGE BREAK -

IECEx Certificate
of Conformity
 
Certificate No.:IECEx KOS 07.0003X
 
Date of Issue:2009-10-08Issue No.: 5
 
Page 2 of 4
 
 Manufacturer:
Hyundai Heavy Industries CO., LTD.
#1, Cheonha-Dong, Dong-Ku, Ulsan, 617-060
Korea, Republic of


 
 Additional Manufacturing location(s):
 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2004
Edition: 4.0		Electrical apparatus for explosive gas atmospheres - Part 0: General requirements
IEC 60079-1 : 2003
Edition: 5		Electrical apparatus for explosive gas atmospheres - Part 1: Flameproof enclosure 'd'
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:
KR/KOS/ExTR07.0003/00KR/KOS/ExTR07.0003/01KR/KOS/ExTR07.0003/02KR/KOS/ExTR07.0003/03


Quality Assessment Report:

KR/KOS/QAR06.0002/03


- PAGE BREAK -

IECEx Certificate
of Conformity
 
Certificate No.:IECEx KOS 07.0003X
 
Date of Issue:2009-10-08Issue No.: 5
 
Page 3 of 4
 
 
Schedule
 
EQUIPMENT:
Equipment and systems covered by this certificate are as follows:
 

The type HDE5 315 Frame motor is designed for use in potentially gas explosive atmospheres. It has several electrical ratings in same frame. It is a totally enclosed fan cooled (TEFC) asynchronous motor. The cooling of a TEFC-motor is provided by an external air fan cooling the frame. The type HDE5 315 Frame motor consists of a motor housing and three-parts terminal box (one part optional). The frame and terminal box are made of steel fabricated. The external fan is made of conductive polypropylene. The type of HDE5 315 Frame are designed for electrical ratings within the following limits:

HDE5 314-66E : 200kW, 6P, 6600V, 24.9A, 60Hz, F Class, S1, Tamb=-20~+50℃  
HDE5 314-26E : 250kW, 2P, 6600V, 25.3A, 60Hz, F Class, S1, Tamb=-20~+50℃
HDE5 311-45E : 210kW, 4P, 3300V, 45.7A, 60Hz, F Class, S1, Tamb=-20~+50℃
HDE5 310-45E : 132kW, 4P, 3300V, 28.9A, 60Hz, F Class, S1, Tamb=-20~+50℃

The other mechanical parts of the motor are no change. So only thermal tests are carried out to these motors.
The temperature rise tests were carried out at each rated power according to IEC60079-0 and IEC 60079-1. The motor was tested at the unfavourable voltage between 90% to 110% of nominal voltage. The temperature values are taken after the test run was stabilized. All the test results are described in evaluation record and temperature rise test report.
Air–cooling is provided by means of a fan mounted on the motor shaft on the N-end  and outside of the enclosure. The fan is made of conductive polypropylene. But it can be made of brass, aluminum or steel fabricated.

 
CONDITIONS OF CERTIFICATION: YES as shown below:
 

The maximum constructional gap (ic) is less than the maximum allowed gap as specified in Table 1 of IEC 60079-1(2003) standard.

 


- PAGE BREAK -

IECEx Certificate
of Conformity
 
Certificate No.:IECEx KOS 07.0003X
 
Date of Issue:2009-10-08Issue No.: 5
 
Page 4 of 4
 
 
DETAILS OF CERTIFICATE CHANGES (for issues 1 and above):
 
 

This report supplements the electrical ratings in same frame(315 Fr) as follows:


     Type                                                  Rating

HDE5 312-48E            180 kW, 4 P, 3,000 V, 50 Hz, F Class, S1, Tamb=-20~+40 ℃  

HDE5 314-26E            220 kW, 2 P, 6,600 V, 60 Hz, F Class, S1, Tamb=-20~+40 ℃  

HDE5 316-66E            218 kW, 6 P, 6,600 V, 60 Hz, F Class, S1, Tamb=-20~+40 ℃  

HDE4 318-44E            300 kW, 4 P, 440 V, 15-60 Hz, F Class, S1, Tamb=-20~+40 ℃  


In case of variable frequency, the motors must be supplied according to the manufacturer's specifications stated on the name plate to ensure the temperature class. The relevant instructions for use on variable frequency stated by manufacturer have to be respected.


 
 








Copyright © IEC-IECEx 2013 , Geneva Switzerland. All rights reserved.