IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

IECEx Certificate
of Conformity
 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com
 
Certificate No.:
IECEx NEM 10.0017X issue No.:1
 
Status:
Current
 
Date of Issue:2011-05-30 Page 1 of 4


    
Applicant:
Cavotec Micro-control as
Gevinglia 112
7517 Hell
Norway


 
Electrical Apparatus:Ex barrier
Optional accessory:


 
Type of Protection:Increased safety, Intrinsic safety


 
Marking: Ex nA [ia Gb] IIB T5 Gc Ta: +60°C
[Ex ia Db] IIIC Ta: +60°C
[Ex ia Ma] I Ta: +60°C
 
Approved for issue on behalf of the IECEx
Certification Body:		Rolf Hoel

 
Position:Certification Manager Ex products


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 
 Certificate issued by:
NEMKO
Gaustadelleen 30
Oslo N-0314
Norway


- PAGE BREAK -

IECEx Certificate
of Conformity
 
Certificate No.:IECEx NEM 10.0017X
 
Date of Issue:2011-05-30Issue No.: 1
 
Page 2 of 4
 
 Manufacturer:
Cavotec Micro-control as
Gevinglia 112
7517 Hell
Norway


 
 Additional Manufacturing location(s):
 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2007-10
Edition: 5		Explosive atmospheres - Part 0:Equipment - General requirements
IEC 60079-11 : 2006
Edition: 5		Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
IEC 60079-15 : 2005-03
Edition: 3		Electrical apparatus for explosive gas atmospheres Part 15: Construction, test and Marking of Type of Protection "n" electrical apparatus
IEC 61241-11 : 2005
Edition: 1		Electrical apparatus for use in the presence of combustible dusts - Part 11: Protection by intrinsic safety 'iD'
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:
NO/NEM/ExTR11.0002/00NO/NEM/ExTR11.0002/01


Quality Assessment Report:

NO/NEM/QAR08.0002/02


- PAGE BREAK -

IECEx Certificate
of Conformity
 
Certificate No.:IECEx NEM 10.0017X
 
Date of Issue:2011-05-30Issue No.: 1
 
Page 3 of 4
 
 
Schedule
 
EQUIPMENT:
Equipment and systems covered by this certificate are as follows:
 

Ex barrier with intrinsically safe output.

Type Designation:

MC-EX-BARRIER2

 
CONDITIONS OF CERTIFICATION: YES as shown below:
 
The Ex barrier shall be mounted in an enclosure which complies to the reguirements of Clause 26.3 of IEC 60079-15 and fulfil IP 54 or alternatively be mounted in an Ex e enclosure.
 


- PAGE BREAK -

IECEx Certificate
of Conformity
 
Certificate No.:IECEx NEM 10.0017X
 
Date of Issue:2011-05-30Issue No.: 1
 
Page 4 of 4
 
 
DETAILS OF CERTIFICATE CHANGES (for issues 1 and above):
 
Issue 1: New adress of manufacturer.
 
 








Copyright © IEC-IECEx 2013 , Geneva Switzerland. All rights reserved.