IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

leftca_pagelinks
IECEx Certificate
of Conformity

 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com

 
Certificate No.:
IECEx SIM 13.0005 issue No.: 3
 
Status:
Current
 
Date of Issue:2017-12-15Page 1 of 5
 
 
Applicant:
Jatco (Australia) Pty Ltd t/a Applied Resolution Technologies
Lot 521 Sullivans Road
YAMBA NSW 2464
Australia
Equipment:Mining and Tunnel Lasers, Models: SLX-635P, FLXS-635-ST, FLXS-635-SC, BLX-635, SLX-635S, SLX-515S, SLM-635S, SLM-515S, BLX-635S and BLX-515S
 
Optional accessory:
 
Type of Protection:Intrinsic Safety "i"

 Marking:

Ex ia I
   or
Ex ia IIB T*
* T rating T1, T3 or T4 dependant on batteries used (Refer Annex)
IECEx SIM 13.0005

 

 
 
Approved for issue on behalf of the IECEx
Certification Body:
Geoffrey Barnier

 
Position:Principal Engineer - Certification


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 

  Certificate issued by:
Safety in Mines Testing and Research Station (Simtars)
2 Robert Smith Street, REDBANK QLD 4301
Australia


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx SIM 13.0005
 
Date of Issue:2017-12-15Issue No.: 3
 
Page 2 of 5
  
Manufacturer:
Jatco (Australia) Pty Ltd t/a Applied Resolution Technologies
Lot 521 Sullivans Road
YAMBA NSW 2464
Australia


 
Additional Manufacturing location(s):

 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2011
Edition: 6.0
Explosive atmospheres - Part 0: General requirements
IEC 60079-11 : 2011
Edition: 6.0
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:

AU/SIM/ExTR13.0003/00AU/SIM/ExTR13.0003/01AU/SIM/ExTR13.0003/02AU/SIM/ExTR13.0003/03


Quality Assessment Report:

AU/SIM/QAR10.0001/07


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx SIM 13.0005
 
Date of Issue:2017-12-15Issue No.: 3
 
Page 3 of 5
 
Schedule
 EQUIPMENT:
Equipment and systems covered by this certificate are as follows
 
 

The SL- and BL-series of Mining and Tunnel Lasers is a self-contained apparatus powered by a non-rechargeable battery pack consisting of alkaline cells in either AA-size, C-size or D-size options. Various configuration options allow the lasers to be used with removable or non-removable battery packs. In laser configurations fitted with non-removable battery packs, power to the laser circuitry is limited by a fuse located in the laser head. In removable battery pack configurations, the fuse is located in the battery pack. Fuses are not replaceable by the user.

Refer Annex for equipment configuration.



 SPECIFIC CONDITIONS OF USE:   NO
 
 
 


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx SIM 13.0005
 
Date of Issue:2017-12-15Issue No.: 3
 
Page 4 of 5
 
 DETAILS OF CERTIFICATE CHANGES (for issues 1 and above):
 
 

Issue 1:
- Addition of new battery modules SB-AAA, BB-CC, BB-CCC and BB-CCCCC.
- Addition of bronze/brass adaptors to modularize battery packs.
- Other minor mechanical changes.

Issue 2:
- Addition of 6-cell removable battery packs using previously certified AA-, C- or D-type cells
- Addition of adapter fittings to extend range of laser head / battery module combinations
- Substitution of fuses with shorting link in laser heads fitted with removable battery packs
- Change to lower resistance fuse types
- Increase in resistance of resistor R1 on LCLNichia circuit board
- Alternative on/off switch for BLX-type lasers using C-cell battery packs
- Dimensional changes to BLXS laser-head housing
- Documentation changes and corrections

Issue 3:
- Introduction of FLXS-635-ST and FLXS-635-SC Fiber Test Lasers to the range of lasers
- Alternative green laser diode for BLX-515S, SLX-515S and SLM-515S lasers
- Alternative lens for SLX- and SLM-series lasers
- Fitting of level vial to SLX-and SLM-series lasers now optional
- Documentation changes and corrections

 
 


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx SIM 13.0005
 
Date of Issue:2017-12-15Issue No.: 3
 
Page 5 of 5
 
 Additional information:
 
 

The batteries can only be removed or replaced in a non-hazardous area.

Battery packs SB-AA, SB-AAA, SB-AAAAA, BB-CC, BB-CCC, BB-CCCCC, BB-DD, BB-DDD and BB-DDDDD are of the modular types and can be removed from the laser head in the hazardous area.

 
 
 




Copyright © IEC-IECEx 2019 , Geneva Switzerland. All rights reserved.