IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

leftca_pagelinks
IECEx Certificate
of Conformity

 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com

 
Certificate No.:
IECEx SIR 08.0059 issue No.:3
 
Status:
Current
 
Date of Issue:2011-10-18 Page 1 of 4


    
Applicant:
Pepperl+Fuchs GmbH
Lilienthalstrasse 200
68307 Mannheim
Germany


 
Equipment:Pygmy Fuse Unit
Optional accessory:


 
Type of Protection:Flameproof and Dust


 
Marking: Ex d IIC T6 Gb
Ex tb IIIC T80C Db IP6X
(10 W max) (Tamb = -40C to +50C)
or
Ex d IIC T5 Gb
Ex tb IIIC T95C Db IP6X
(10 W max) (Tamb = -40C to +55C)
 
Approved for issue on behalf of the IECEx
Certification Body:
D R Stubbings BA MIET

 
Position:Certification Manager


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 

 Certificate issued by:
SIRA Certification Service
Rake Lane
Eccleston
Chester
CH4 9JN
United Kingdom


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx SIR 08.0059
 
Date of Issue:2011-10-18Issue No.: 3
 
Page 2 of 4
 
 Manufacturer:
Pepperl+Fuchs GmbH
Lilienthalstrasse 200
68307 Mannheim
Germany


 
 Additional Manufacturing location(s):
Pepperl+Fuchs Manufacturing UK Ltd
Cornwallis Road
West Bromwich
West Midlands
B70 7DX
United Kingdom
Pepperl+Fuchs GmbH
Werk Bhl
Bussmatten 10 - 12
77815 Bhl / Baden
Germany
Pepperl+Fuchs (Manufacturing) PTE LTD
18 Ayer Rajah Crescent
Singapore 139942
Singapore
 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2007-10
Edition: 5
Explosive atmospheres - Part 0:Equipment - General requirements
IEC 60079-1 : 2007-04
Edition: 6
Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
IEC 61241-1 : 2004
Edition: 1
Electrical apparatus for use in the presence of combustible dust - Part 1: Protection by enclosures "tD"
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:
GB/SIR/ExTR09.0167/00GB/SIR/ExTR10.0193/00GB/SIR/ExTR10.0194/00GB/SIR/ExTR10.0302/00GB/SIR/ExTR11.0242/00


Quality Assessment Report:

DE/PTB/QAR06.0008/02DE/PTB/QAR06.0015/01DE/PTB/QAR10.0008/00GB/SIR/QAR07.0004/01


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx SIR 08.0059
 
Date of Issue:2011-10-18Issue No.: 3
 
Page 3 of 4
 
 
Schedule
 
EQUIPMENT:
Equipment and systems covered by this certificate are as follows:
 

The Pygmy Fuse Unit incorporates a fuse, whilst the Pygmy PCB Unit is fitted with a Public Address Supervision printed circuit board, both types utilise a Pygmy Enclosure certified as IECEx SIR 08.0084U, for further details refer to the Certificate Annexe.

 
CONDITIONS OF CERTIFICATION: NO
 
 


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx SIR 08.0059
 
Date of Issue:2011-10-18Issue No.: 3
 
Page 4 of 4
 
 
DETAILS OF CERTIFICATE CHANGES (for issues 1 and above):
 

Issue 1 – this Issue introduced the following changes:

1The company name and address was changed and alternative manufacturing sites were recognised.
2The use of alternative label materials.
3The addition of a Datamatrix code on the label.
Issue 2 – this Issue introduced the following changes:
1The enclosures are approved to be manufactured in aluminium grade LM6 and stainless steel grade 316.
Issue 3 – this Issue introduced the following changes:
1The option to increase the ambient temperature range from +50°C to +55°C was approved; the marking section is amended accordingly.
 
 








Copyright © IEC-IECEx 2016 , Geneva Switzerland. All rights reserved.