IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

leftca_pagelinks
IECEx Certificate
of Conformity
 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com
 
Certificate No.:
IECEx BVS 10.0009X issue No.:1
 
Status:
Current
 
Date of Issue:2011-08-24 Page 1 of 4


    
Applicant:
Cooper Crouse-Hinds GmbH
Neuer Weg-Nord 49
69412 Eberbach
Germany


 
Equipment:FLT 10 * ** ** * * * resp. PX(I) 04 * *** **
Optional accessory:


 
Type of Protection:Flameproof enclosure 'd'; Increased safety "e"; Protection by enclosures "tD"


 
Marking: Version type FLT 10 * ** ** * * * without EJB-enclosure
Ex de IIB T3 - T4 Gb resp. Ex d IIB T3 - T4 Gb
Ex tb III C T115 °C – T190 °C Db IP66
-------------------------------------------------------------
Version type FLT 10 * ** ** * * * with EJB-enclosure
Ex de IIB T3 - T4 Gb resp. Ex d IIB T3 - T4 Gb
-------------------------------------------------------------
Version type PX 04 * *** ** resp. PXI 04 * *** ** without EJB-enclosure
Ex de IIB T3 - T4 Gb or Ex d IIB T3 - T4 Gb
Ex tb III C T85 °C –210 °C Db IP66
------------------------------------------------------------
Version type PX 04 * *** ** resp. PXI 04 * *** ** with EJB-enclosure
Ex de IIB T3 - T4 Gb bzw. Ex d IIB T3 - T4 Gb
 
Approved for issue on behalf of the IECEx
Certification Body:		P. Migenda

 
Position:Deputy Head of Certification Body


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 
 Certificate issued by:
DEKRA EXAM GmbH
Dinnendahlstrasse 9
44809 Bochum
Germany


- PAGE BREAK -

IECEx Certificate
of Conformity
 
Certificate No.:IECEx BVS 10.0009X
 
Date of Issue:2011-08-24Issue No.: 1
 
Page 2 of 4
 
 Manufacturer:
Cooper Crouse-Hinds GmbH
Neuer Weg-Nord 49
69412 Eberbach
Germany


 
 Additional Manufacturing location(s):
Cooper Crouse Hinds SA
Avda, Santa Eulalia, 290
08223 Terassa (Barcelona)
Spain		 Cooper Crouse-Hinds GmbH
Neuer Weg-Nord 49
69412 Eberbach
Germany

 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2007-10
Edition: 5		Explosive atmospheres - Part 0:Equipment - General requirements
IEC 60079-1 : 2007-04
Edition: 6		Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
IEC 60079-31 : 2008
Edition: 1		Explosive atmospheres – Part 31: Equipment dust ignition protection by enclosure 't'
IEC 60079-7 : 2006-07
Edition: 4		Explosive atmospheres - Part 7: Equipment protection by increased safety "e"
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:
DE/BVS/ExTR10.0010/01


Quality Assessment Report:

DE/PTB/QAR07.0008/01HU/BKI/QAR07.0001/04


- PAGE BREAK -

IECEx Certificate
of Conformity
 
Certificate No.:IECEx BVS 10.0009X
 
Date of Issue:2011-08-24Issue No.: 1
 
Page 3 of 4
 
 
Schedule
 
EQUIPMENT:
Equipment and systems covered by this certificate are as follows:
 
Description:
 
The floodlights type FLT 10 * ** ** * * * resp. PX(I) 04 * *** **consist of the following:
- a lamp enclosure with lamp socket and reflector manufactured to meet the requirements of the type of protection Flameproof Enclosure ‘d’ and
- a junction box for connecting the external cable, depending on the cable entry manufactured according to the type of protection Flameproof Enclosure ‘d’ or Increased Safety ‘e’.
Additionally, some variants feature a compensation box – manufactured according to the type of protection Flameproof Enclosure ‘d’ – to allow external components to be mounted, for example electronic ballasts, ignition devices or capacitors.
This compensation box may be replaced by an enclosure of either type EJB 110, 120 or 130 of type of protection Flameproof Enclosure ‘d’ into which several ballasts and capacitors can be mounted.
The floodlight variants type FLT 10 * ** ** * * * resp. PX(I) 04 * *** **in conjunction with the enclosure type EJB are only suitable for use in potentially explosive gas atmospheres.
 
The glass window of the lamp enclosure is sealed into its frame by means of a compound. Together with the floodlight enclosure the frame is defined as a flameproof flat joint. Electric power is supplied by cable glands separately certified for this purpose.
 
 
Parameters:
 
See Annex
 
SPECIFIC CONDITIONS OF USE: YES as shown below:
 
The widths of the flameproof joint of this apparatus are in parts longer than required by Table 3 of
IEC 60079-1:2007. Information on the dimensions has to be obtained from the manufacturer.
 
The floodlight can only be used if mounted horizontally (ceiling mounting). Relevant hints in the instruction manual have to be observed.
 
Only such components (bushings, cable glands, connecting parts) are permitted for mounting that meet the technical status of the standard stated on the front page; furthermore, the components have to be suitable for the ambient conditions of use and separately certified.
 
In order to close the flameproof compartment screws have to be used that comply at least with strength category A2-70.
 


- PAGE BREAK -

IECEx Certificate
of Conformity
 
Certificate No.:IECEx BVS 10.0009X
 
Date of Issue:2011-08-24Issue No.: 1
 
Page 4 of 4
 
 
DETAILS OF CERTIFICATE CHANGES (for issues 1 and above):
 


The type FLT 10 * ** ** * * * supplements the types PX 04 * *** ** and PXI 04 * *** ** of the floodlight.

The manufacturing site in Spain has been added.

 
 








Copyright © IEC-IECEx 2017 , Geneva Switzerland. All rights reserved.