IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

IECEx Certificate
of Conformity

 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com

 
Certificate No.:
IECEx SIM 05.0008X issue No.:1
 
Status:
Current
 
Date of Issue:2006-06-30 Page 1 of 5


    
Applicant:
ATF Mining Electrics Pty Ltd
39 Munibung Road
CARDIFF NSW 2285
Australia


 
Electrical Apparatus:Series 170 Enclosure
Optional accessory:


 
Type of Protection:d


 
Marking: Ex d I T6 IP55
IECEx SIM 05.0008X
 
Approved for issue on behalf of the IECEx
Certification Body:
Ashraf Chowdhury

 
Position:Principal Engineer - Certification


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 

 Certificate issued by:
Safety in Mines Testing and Research Station (Simtars)
2 Smith Street
REDBANK QLD 4301
Australia


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx SIM 05.0008X
 
Date of Issue:2006-06-30Issue No.: 1
 
Page 2 of 5
 
 Manufacturer:
ATF Mining Electrics Pty Ltd
39 Munibung Road
CARDIFF NSW 2285
Australia


 
 Additional Manufacturing location(s):
 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2000
Edition: 3.1
Electrical apparatus for explosive gas atmospheres - Part 0: General requirements
IEC 60079-1 : 2001
Edition: 4
Electrical apparatus for explosive gas atmospheres - Part 1: Flameproof enclosures 'd'
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
IECEx ATR:File Reference:
AU/SIM/05/0007   03/0221, 04/0013  
AU/SIM/ExTR06.0013/01   05/0274  
   


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx SIM 05.0008X
 
Date of Issue:2006-06-30Issue No.: 1
 
Page 3 of 5
 
 
Schedule
 
EQUIPMENT:
Equipment and systems covered by this certificate are as follows:
 
The Series 170 Enclosure is of welded mild steel construction with a mild steel bolt-on cover. The cover may be fitted with a viewing window. Entry options for the sidewalls of the enclosure are as follows:
· up to six pushbutton operators, or
· one selector switch operator, or
· up to four threaded entries for fitting separately certified cable glands and blanking elements, or
· one entry for fitting a separately certified component.

Internal components of the apparatus include contact blocks, control relays, LED indication panel, DIN rail mounted terminal blocks or circuit breakers or combinations thereof as per manufacturer's documentation.

MANUFACTURER'S DOCUMENTS: Refer Annex 
 
CONDITIONS OF CERTIFICATION: YES as shown below:
 
The M12 cover fasteners used for the apparatus shall be of Property Class 12.9.

When configured as a switchgear, the means for isolating the apparatus shall be in accordance with clause 17.1 of IEC 60079-1: 2001.

Maximum power dissipation of equipment installed in the enclosure shall not exceed 31 W.
 


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx SIM 05.0008X
 
Date of Issue:2006-06-30Issue No.: 1
 
Page 4 of 5
 
 
DETAILS OF CERTIFICATE CHANGES (for issues 1 and above):
 
1. Amendment to drawings to allow variation in size, number and spacing of threaded entries in the walls of the enclosure
2. Reduction in the size of the marking label
3. Inclusiion of an optional internal component layout comprising up to two pressure switches (Type 166, SUCO 24A/F).
 
 


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx SIM 05.0008X
 
Date of Issue:2006-06-30Issue No.: 1
 
Page 5 of 5
 
 
Additional information:
 
Separately certified cable glands and blanking elements fitted to the apparatus shall have a degree of protection rating of at least IP55.

Routine pressure testing on the enclosure shall be carried out, in accordance with clause 16 of IEC 60079-1: 2001, at not less than 1022 kPa.
 
 








Copyright © IEC-IECEx 2014 , Geneva Switzerland. All rights reserved.