This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.
This Unit verification certificate is issued as verification that the Apparatus identified on page 1, was assessed and tested and found to comply with the IEC Standard list below. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.
The apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:
As this is a Unit Verification Certificate, no QAR is applicable as this certificate is specific to the items listed by serial number or other unique identification.
The IEx3HA08/06 - Series motor is designed for use in potentially gas explosive atmospheres. It has several electrical ratings in the same frame. The IEx3HA08/06 - Series motor consists of frame and end shield. The motor frame is made of SAPH440, and the end shield is made of aluminum die casting(ALDC12). The motor is supplied with foot mounting. The external fan is a glass fiber resin.
The motor types of IEx3HA08/06 Series are designed for electrical ratings within the following limits;
-Maximum constructional gap (ic) less than that required by Table 1 of IEC 60079-1 standard.
-WARNING - THE TEMPERATURE AT CABLE BLANCHING POINT MAY EXCEED 80°C RESPECTIVELY THEREFORE SELECT THE APPROPRIATE CABLE GLAND AND CABLE OR CONDUCTOR”