IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

leftca_pagelinks
IECEx Certificate
of Conformity

 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com

 
Certificate No.:
IECEx CSA 13.0026 issue No.:0

Certificate history:

 
Status:
Current
 
Date of Issue:2013-09-13 Page 1 of 3


    
Applicant:
EXLAR Corporation
18400 West 77th Street,
Chanhassen, MN 55317
United States of America


 
Equipment:Controller model EXP-120-5
Optional accessory:


 
Type of Protection:Ex d


 
Marking:

Ex d IIB+H2 T5 Gb

Tamb: -29C to 82C

 
Approved for issue on behalf of the IECEx
Certification Body:
Dorin Stochitoiu

 
Position:Technical Advisor


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 

 Certificate issued by:
CSA International
178 Rexdale Boulevard
Toronto, Ontario M9W IR3
Canada
and
1707 - 94th Street
Edmonton, AB T6N 1E6
Canada


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx CSA 13.0026
 
Date of Issue:2013-09-13Issue No.: 0
 
Page 2 of 3
 
 Manufacturer:
EXLAR Corporation
18400 West 77th Street,
Chanhassen, MN 55317
United States of America


 
 Additional Manufacturing location(s):

 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2011
Edition: 6.0
Explosive atmospheres - Part 0: General requirements
IEC 60079-1 : 2007-04
Edition: 6
Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:
CA/CSA/ExTR13.0026/00


Quality Assessment Report:

CA/CSA/QAR09.0021/02


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx CSA 13.0026
 
Date of Issue:2013-09-13Issue No.: 0
 
Page 3 of 3
 
 
Schedule
 
EQUIPMENT:
Equipment and systems covered by this certificate are as follows:
 
EXP-120-5 is designed for controlling Exlar rotary or linear actuators in applications such as damper control, turbine guide vain or other process applications. It includes a 120Vdc, 5A rated control electronics  enclosed in an flameproof enclosure, eqipped with a flameproof breather drain.
 
SPECIFIC CONDITIONS OF USE: NO
 
 







Copyright © IEC-IECEx 2018 , Geneva Switzerland. All rights reserved.