IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

leftca_pagelinks
IECEx Certificate
of Conformity

 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com

 
Certificate No.:
IECEx BVS 10.0078X issue No.: 0
 
Status:
Current
 
Date of Issue:2010-11-02Page 1 of 3
 
 
Applicant:
Hummel AG
Lise-Meitner-Straße 2
79211 Denzlingen
Germany
Equipment:Cable gland series type EXIOS 20-1, type EXIOS 20-2, type EXIOS 20-3, type EXIOS 25, type EXIOS 32, type EXIOS 40, type EXIOS 50, type EXIOS 63 and type EXIOS 75
 
Optional accessory:
 
Type of Protection:Flameproof enclosures 'd'; Protection by enclosure 't'; Increased safety 'e'

 Marking: Ex de IIC Gb
Ex ta III C Da IP66/IP68
 
 
Approved for issue on behalf of the IECEx
Certification Body:
H.-Ch. Simanski

 
Position:Head of Certification Body


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 

  Certificate issued by:
DEKRA EXAM GmbH
Dinnendahlstrasse 9
44809 Bochum
Germany


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx BVS 10.0078X
 
Date of Issue:2010-11-02Issue No.: 0
 
Page 2 of 3
  
Manufacturer:
Hummel AG
Lise-Meitner-Straße 2
79211 Denzlingen
Germany


 
Additional Manufacturing location(s):

 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2007-10
Edition: 5
Explosive atmospheres - Part 0:Equipment - General requirements
IEC 60079-1 : 2007-04
Edition: 6
Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
IEC 60079-31 : 2008
Edition: 1
Explosive atmospheres – Part 31: Equipment dust ignition protection by enclosure 't'
IEC 60079-7 : 2006-07
Edition: 4
Explosive atmospheres - Part 7: Equipment protection by increased safety "e"
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:

DE/BVS/ExTR10.0112/00


Quality Assessment Report:

DE/BVS/QAR07.0001/02


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx BVS 10.0078X
 
Date of Issue:2010-11-02Issue No.: 0
 
Page 3 of 3
 
Schedule
 EQUIPMENT:
Equipment and systems covered by this certificate are as follows
 
 
Subject and type
 
Cable gland series type EXIOS 20-1, type EXIOS 20-2, type EXIOS 20-3, type EXIOS 25, type EXIOS 32, type EXIOS 40, type EXIOS 50, type EXIOS 63 and type EXIOS 75.
 

 
Parameters:
 
Permitted temperature range of the cable glands                          -60 °C to +105 °C
 
The ambient temperature of electrical equipment is usually limited to -20 °C < Ta < +40 °C.
The maximum ambient temperature permitted for these cable glands may be exceeded or fall below as long as the permitted temperature range of the cable glands meets -60 °C up to +105 °C.
 
IP degrees of protection according to EN 60529                           IP 68 and IP 66


 SPECIFIC CONDITIONS OF USE:   YES as shown below:
 
 
The cable glands have to be used together with permanent installations of cables and wires unless the cables and wires in question are reinforced.
 




Copyright © IEC-IECEx 2019 , Geneva Switzerland. All rights reserved.