IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

leftca_pagelinks
IECEx Certificate
of Conformity

 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com

 
Certificate No.:
IECEx CES 13.0001 issue No.: 0
 
Status:
Current
 
Date of Issue:2013-03-18Page 1 of 3
 
 
Applicant:
CORTEM S.p.A.
Via Aquileia 10
I - 34070 Villesse (GO)
Italy
Equipment:Terminal boxes, series CTB, CSTB and SA
 
Optional accessory:
 
Type of Protection:Increased safety 'e'; Intrinsic Safety "i", Dust ignition protection “t”

 Marking:

Ex e IIC T6 or T5 Gb
Ex tb III C T85°C or T100°C Db

IP66            or

Ex ia IIC T6 or T5 Gb
Ex ia III C T85°C or T100°C Db

IP66           or

Ex e ia IIC T6 or T5 Gb
Ex tb ia III C T85°C or T100°C Db

IP66

 
 
Approved for issue on behalf of the IECEx
Certification Body:
Mirko Balaz

 
Position:Head of IECEx CB


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 

  Certificate issued by:
CESI
Centro Elettrotecnico
Sperimentale Italiano S.p.A.
Via Rubattino 54
20134 Milano
Italy


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx CES 13.0001
 
Date of Issue:2013-03-18Issue No.: 0
 
Page 2 of 3
  
Manufacturer:
CORTEM S.p.A.
Via Aquileia 10
I - 34070 Villesse (GO)
Italy


 
Additional Manufacturing location(s):

 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2011
Edition: 6.0
Explosive atmospheres - Part 0: General requirements
IEC 60079-11 : 2011
Edition: 6.0
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
IEC 60079-31 : 2008
Edition: 1
Explosive atmospheres – Part 31: Equipment dust ignition protection by enclosure 't'
IEC 60079-7 : 2006-07
Edition: 4
Explosive atmospheres - Part 7: Equipment protection by increased safety "e"
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:

IT/CES/ExTR13.0001/00


Quality Assessment Report:

IT/CES/QAR06.0002/07


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx CES 13.0001
 
Date of Issue:2013-03-18Issue No.: 0
 
Page 3 of 3
 
Schedule
 EQUIPMENT:
Equipment and systems covered by this certificate are as follows
 
 

Terminal boxes series CTB, CSTB and SA consists of enclosures made in aluminium or in stainless steel or in polyester resin with type of protection Increased Safety 'e' and Protection by enclosure 'tb'.

They are equipped with Ex e terminals (CABUR, WEIDMULLER or others certified IECEx in execution Ex e IIC) for circuits with type of protection Increased Safety 'e' or Intrinsic Safety 'ia' or combinations of both.

The cover is fixed to the body with 4, 6 or 8 anti loosening screw. Between body and cover the silicon gasket guarantee the protection degree IP66.

 

See annex for further description.


 SPECIFIC CONDITIONS OF USE:   NO
 
 
 




Copyright © IEC-IECEx 2019 , Geneva Switzerland. All rights reserved.