IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

leftca_pagelinks
IECEx Certificate
of Conformity

 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com

 
Certificate No.:
IECEx MSC 14.0007U issue No.:0

Certificate history:

 
Status:
Current
 
Date of Issue:2015-11-03 Page 1 of 4


    
Applicant:
Transponder Technologies Pty Ltd
2 Hamra Drive, Export Park,
ADELAIDE AIRPORT SA 5950
Australia


 
Equipment:T5 Electronics Associated Equipment
Optional accessory:


 
Type of Protection:Intrinsic Safety


 
Marking: [Ex ib Gb] IIA
 
Approved for issue on behalf of the IECEx
Certification Body:
Geoff Slater

 
Position:Manager


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 

 Certificate issued by:
MSTC Mine Safety Technology Centre
8 Hartley Drive
Thornton NSW 2322
PO Box 343
Hunter Region Mail Centre NSW 2310
Australia


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx MSC 14.0007U
 
Date of Issue:2015-11-03Issue No.: 0
 
Page 2 of 4
 
 Manufacturer:
Transponder Technologies Pty Ltd
2 Hamra Drive, Export Park,
ADELAIDE AIRPORT SA 5950
Australia


 
 Additional Manufacturing location(s):

 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2011
Edition: 6.0
Explosive atmospheres - Part 0: General requirements
IEC 60079-11 : 2011
Edition: 6.0
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:
AU/MSC/ExTR15.0004/00


Quality Assessment Report:

AU/MSC/QAR15.0001/00


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx MSC 14.0007U
 
Date of Issue:2015-11-03Issue No.: 0
 
Page 3 of 4
 
 
Schedule
 
EQUIPMENT:
Equipment and systems covered by this certificate are as follows:
 

The range of populated printed wiring cards comprises of the following;

1.     T5 DUAL HACM-ACS PSU (080547).

2.     T5 DUAL LACM-ACS PSU (081446).

3.     T5 GILBARCO FCN IFC (079009).

4.     T5 NZPP FCN IFC (078118).

5.     T5 HACM-ACS PSU EXPAND (080597).

6.     T5 LACM-ACS PSU EXPAND (081454).

7.   T5 RS485 FCN IFC (089541)

The T5 DUAL HACM-ACS PSU (080547) and T5 DUAL LACM-ACS PSU (081446) power supply cards comprise of a single multilayer printed circuit card upon which are mounted electronic components including a transformer and opto-isolators that provide galvanic isolation. Voltage and current limitation to the hazardous area is provided by zener diode clamps and current limiting resistors.

 

The T5 GILBARCO FNC IFC (079009) and T5 NZPP FCN IFC (078118) interface cards comprise of a single multilayer printed circuit card upon which are mounted electronic components including opto-isolators that provide galvanic isolation. Voltage and current limitation to the hazardous area is provided by the opto-isolators.

 

The T5 HACM-ACS PSU EXPAND (080597) and T5 DUAL LACM-ACS PSU EXPAND (081454) comprise of a single multilayer printed circuit cards upon which are mounted electronic components. Voltage and current limitation to the hazardous area is provided by the opto-isolators.

 

 

The T5 RS485 FCN IFC (089541)card comprises of a single multilayer printed circuit card upon which are mounted electronic components. Voltage and current limitation to the hazardous area is provided by the opto-isolators, zener diodes, current limiting resistors and series blocking diodes.

 

 
SPECIFIC CONDITIONS OF USE: NO
 

Refer to the attached annex for Schedule of Limitations.

 


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx MSC 14.0007U
 
Date of Issue:2015-11-03Issue No.: 0
 
Page 4 of 4
 
 
Additional information:
 
Refer to the attached Annex
 
 








Copyright © IEC-IECEx 2017 , Geneva Switzerland. All rights reserved.