IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

leftca_pagelinks
IECEx Certificate
of Conformity

 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com

 
Certificate No.:
IECEx SIM 13.0005 issue No.:0
 
Status:
Current
 
Date of Issue:2013-05-22 Page 1 of 5


    
Applicant:
Jatco (Australia) Pty Ltd t/a Applied Resolution Technologies
Lot 521 Sullivans Road
YAMBA NSW 2464
Australia


 
Equipment:Mining and Tunnel Lasers, Models: SLX-635P, SLX-635S, SLX-515S, SLM-635S, SLM-515S, BLX-635, BLX-635S and BLX-515S
Optional accessory:


 
Type of Protection:ia


 
Marking:

Ex ia I
   or
Ex ia IIB T*
* T rating T1, T3 or T4 dependant on batteries used. Refer Table 1.
IECEx SIM 13.0005

 

 
Approved for issue on behalf of the IECEx
Certification Body:
Ashraf Chowdhury

 
Position:Principal Engineer


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 

 Certificate issued by:
Safety in Mines Testing and Research Station (Simtars)
2 Smith Street
REDBANK QLD 4301
Australia


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx SIM 13.0005
 
Date of Issue:2013-05-22Issue No.: 0
 
Page 2 of 5
 
 Manufacturer:
Jatco (Australia) Pty Ltd t/a Applied Resolution Technologies
Lot 521 Sullivans Road
YAMBA NSW 2464
Australia


 
 Additional Manufacturing location(s):

 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2011
Edition: 6.0
Explosive atmospheres - Part 0: General requirements
IEC 60079-11 : 2011
Edition: 6.0
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:
AU/SIM/ExTR13.0003/00


Quality Assessment Report:

AU/SIM/QAR10.0001/03


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx SIM 13.0005
 
Date of Issue:2013-05-22Issue No.: 0
 
Page 3 of 5
 
 
Schedule
 
EQUIPMENT:
Equipment and systems covered by this certificate are as follows:
 
The Alignment Lasers are battery powered (refer Table 1) and comprises a laser module and a battery compartment. The laser body is of zinc-plated brass or bronze construcion.

User instructions of the equipments are 253, 237, 226, 0180, 320, 0261 and 0181.

 

 
SPECIFIC CONDITIONS OF USE: NO
 
 


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx SIM 13.0005
 
Date of Issue:2013-05-22Issue No.: 0
 
Page 4 of 5
 
 
EQUIPMENT(continued):
 

 

Table 1: Battery types and temperature classification for each model

Model Number

Permitted Battery types & number

Temperature Classification

SLX-635P

Panasonic Industrial LR6XW
AA size 2EA

T3

BLX-635

Panasonic Industrial LR20XW
D size 2EA or 3EA

T3

SLX-635S

Panasonic Industrial LR6XW 
AA size 2EA

T3

SLX-515S

Panasonic Industrial LR6XW
AA size 5EA

T1

SLM-635S

Panasonic Industrial LR6XW
AA size 2EA

T3

SLM-515S

Panasonic Industrial LR6XW
AA size 5EA

T1

BLX-635S

Panasonic Industrial LR14XW
C size 2EA or 3EA

T4

Panasonic Industrial LR20XW
D size 2EA or 3EA

T3

BLX-515S

Panasonic Industrial LR14XW
C size 5EA or 
Panasonic Industrial LR20XWD size 5EA

T1

 
 
 


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx SIM 13.0005
 
Date of Issue:2013-05-22Issue No.: 0
 
Page 5 of 5
 
 
Additional information:
 
The batteries can only be removed or replaced in a non-hazardous area.

Battery packs SB-AA, SB-AAAAA, BB-DD, BB-DDD and BB-DDDDD are of the modular type and can be removed from the laser head in the hazardous area.
 
 








Copyright © IEC-IECEx 2017 , Geneva Switzerland. All rights reserved.