IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

leftca_pagelinks
IECEx Certificate
of Conformity

 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com

 
Certificate No.:
IECEx FTZU 11.0004X issue No.: 3
 
Status:
Current
 
Date of Issue:2016-06-10Page 1 of 5
 
 
Applicant:
APLISENS S.A.
ul. Morelowa 7
03-192 Warszawa
Poland
Equipment:Pressure transmitters type: PC-29A/XX/YY, PC-29B/XX/YY, PC-29PA/YY, PC-29PB/YY, Differential pressure transmitters type: PR-29A/XX/YY, PR-29B/XX/YY, Hydrostatic level probe SG-25A and SG-25B.
 
Optional accessory:
 
Type of Protection:Intrinsic safety

 Marking: Ex ia I Ma
Ex ia IIC T4/T5/T6 Ga/Gb for PC-29..., PR-29...
Ex ia IIB T4/T5/T6 Ga for SG-25A, SG-25B
 
 
Approved for issue on behalf of the IECEx
Certification Body:
Dipl. Ing. Lukáš Martinák

 
Position:Head of Certification Body


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 

  Certificate issued by:
Fyzikalne technicky zkusebni ustav
(Physical -Technical Testing Institute)
Pikartska 7, 71607 Ostrava - Radvanice
Czech Republic


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx FTZU 11.0004X
 
Date of Issue:2016-06-10Issue No.: 3
 
Page 2 of 5
  
Manufacturer:
APLISENS S.A.
ul. Morelowa 7
03-192 Warszawa
Poland


 
Additional Manufacturing location(s):

 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2011
Edition: 6.0
Explosive atmospheres - Part 0: General requirements
IEC 60079-11 : 2011
Edition: 6.0
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:

CZ/FTZU/ExTR11.0004/00CZ/FTZU/ExTR11.0004/01


Quality Assessment Report:

PL/KDB/QAR12.0001/02


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx FTZU 11.0004X
 
Date of Issue:2016-06-10Issue No.: 3
 
Page 3 of 5
 
Schedule
 EQUIPMENT:
Equipment and systems covered by this certificate are as follows
 
 
Description of Equipment:
Pressure transmitters PC-29A, PC-29B are designed to measure positive gauge pressure, vacuum pressure and absolute pressure of gases, vapours and liquids. Hydrostatic level probes SG-25A and SG-25B are designed to measure of level of liquid. Differential pressure transmitters PR-29A, PR-29B are designed to measure liquid levels in closed tanks and to measure differential pressure across constructions. The active sensing element is a silicon diaphragm with in-diffused piezoresistors located in a sensing module. The electronic part amplifies and standardizes the signal from measuring bridge to the output voltage (three wires) signal. The electronic circuitry is encapsulated in stainless steel enclosure. The external circuit connection facility differs according to the model.
The letters XX indicate type of process connector, YY indicate type of electric connector.





 SPECIFIC CONDITIONS OF USE:   YES as shown below:
 
 


Version of the transmitter with surge arrester, marked on the plate “SA”, does not meet the requirements of  Section 6.3.13 of IEC 60079-11:2011 (test of isolation 500VAC ). This must be taken into account during the installation of transmitters

 


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx FTZU 11.0004X
 
Date of Issue:2016-06-10Issue No.: 3
 
Page 4 of 5
 
 EQUIPMENT(continued):
 
 

Ambient temperature:
Ta = - 40°C to + 80°C
Ta = - 50°C to + 80°C - version only for explosive gas atmospheres (Group II)


Intrinsically safe parameters:

Types: PC-29A, PC-29PA, PR-29A, SG-25A.
Supply terminals 1,3:
Linear power supply output characteristic:
Ui=16V, Ii=0.2A, Pi=0.8W, Li=10µH, Ci=10nF
-40°C≤Ta≤80°C and T4,
-40°C≤Ta≤70°C and T5,
-40°C≤Ta≤45°C and T6
Trapezoidal and Rectangular power supply output characteristic:
Ui=12V, Ii=0.05A, Pi=0.6W, Li=10µH, Ci=10nF
-40°C≤Ta≤80°C and T4,
-40°C≤Ta≤70°C and T5,
-40°C≤Ta≤45°C and T6
Output terminals 2, 3:
Uo=Ui, Io=Ii, Po=Pi, Lo=0.55mH, Co=0.3 µF

Types: PC-29B, PC-29PB, PR-29B, SG-25B.
Supply terminals 1,3:
Ui=5.6V, Ii=0.2A, Pi=0.56W, Ci=10µF, Li=10µH
-40°C≤Ta≤80°C and T4,
-40°C≤Ta≤70°C and T5,
-40°C≤Ta≤45°C and T6
Output terminals 2, 3:
Uo=Ui, Io=Ii, Po=Pi, Lo=0.55mH, Co=40µF

 
 


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx FTZU 11.0004X
 
Date of Issue:2016-06-10Issue No.: 3
 
Page 5 of 5
 
 DETAILS OF CERTIFICATE CHANGES (for issues 1 and above):
 
 
- Modification of certified apparatus;
- Modification of apparatus marking;
- Adding new model (variant) – extension of series: SG-25A, SG-25B;
 
 




Copyright © IEC-IECEx 2018 , Geneva Switzerland. All rights reserved.