Certificate history:
This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.
This Unit verification certificate is issued as verification that the Apparatus identified on page 1, was assessed and tested and found to comply with the IEC Standard list below. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.
STANDARDS: The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:
As this is a Unit Verification Certificate, no QAR is applicable as this certificate is specific to the items listed by serial number or other unique identification.
The barcode scanner BCSi are designed to read all common barcodes 1D & 2D and to transmit these barcode data to an existing ASD (application supporting device) in hazardous or non-hazardous areas. The BCSi available as cable and as radio frequency version.
The cable scanner version has an intrinsically safe interface for power and data. The data transmission is realized via a serial interface. The cable version is available for low-power and high-power intrinsically safe power interfaces. The radio frequency version has an intrinsically safe interface for charging of internal batteries in hazardous areas via intrinsically safe interfaces, such as for instance ExMod-1-2-3. The data transmission is realized via a radio frequency interface (Bluetooth).
All versions of the BCSi are developed for use in hazardous areas Zone 0, Zone 20, EPL Ga and EPL Da.
