This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.
This Unit verification certificate is issued as verification that the Apparatus identified on page 1, was assessed and tested and found to comply with the IEC Standard list below. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.
The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:
As this is a Unit Verification Certificate, no QAR is applicable as this certificate is specific to the items listed by serial number or other unique identification.
The operator heads are intended to be assembled on Ex enclosure certified for the use.
TCe ‘‘Operator heads’’ range:
- Indicator light,
- Plug head (blanking head),
- Push button,
- Push button (illuminated),
- Mushroom head emergency stop (push / pull),
- Mushroom head Ø 40mm push button,
- Rotary actuator.
Rail mounting or panel mounting (with adaptor).
Schedule of limitations :
The operating temperature limits are -40°C to +60°C.
Specific parameters of the mode(s) of protection concerned :
The operator heads protection against dust is based on the IP6X when they are assembled on a compatible box with similar or above IP level.
Issue 01 :
Adding of a padlock device