IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

IECEx Certificate
of Conformity
 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com
 
Certificate No.:
IECEx LCI 08.0038 issue No.:1
 
Status:
Current
 
Date of Issue:2011-03-02 Page 1 of 4


    
Applicant:
ITT Corp.
Goulds pumps
240 Fall Street
Seneca Falls, NY 13148
United States of America


 
Electrical Apparatus:Condition Monitor
Optional accessory:


 
Type of Protection:ia


 
Marking: ITT Corp.
Address : ...
Condition Monitor
Type : LCCM, p/n C07667A
Ex ia IIC T4
IECEx LCI 08.0038
Tamb : -40°C to +100°C
 
Approved for issue on behalf of the IECEx
Certification Body:		Marc Gillaux

 
Position:Ex Certification Manager


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 
 Certificate issued by:
Laboratoire Central des Industries Electriques (LCIE)
33 Avenue du General Leclerc
FR-92260 Fontenay-aux-Roses
France


- PAGE BREAK -

IECEx Certificate
of Conformity
 
Certificate No.:IECEx LCI 08.0038
 
Date of Issue:2011-03-02Issue No.: 1
 
Page 2 of 4
 
 Manufacturer:
ITT Corp.
Goulds pumps
240 Fall Street
Seneca Falls, NY 13148
United States of America


 
 Additional Manufacturing location(s):
 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2004
Edition: 4.0		Electrical apparatus for explosive gas atmospheres - Part 0: General requirements
IEC 60079-11 : 2006
Edition: 5		Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:
FR/LCI/ExTR08.0043/00FR/LCI/ExTR08.0043/01


Quality Assessment Report:

NO/DNV/QAR08.0006/00


- PAGE BREAK -

IECEx Certificate
of Conformity
 
Certificate No.:IECEx LCI 08.0038
 
Date of Issue:2011-03-02Issue No.: 1
 
Page 3 of 4
 
 
Schedule
 
EQUIPMENT:
Equipment and systems covered by this certificate are as follows:
 

The LCCM is a low cost condition monitor used for vibration monitoring of machinery.  It is a small self-contained unit (no external connections), with internal non-replaceable battery and three LED indicator lights

 Specific parameters of the mode(s) of protection concerned :
Autonomous equipment  powered by a battery :
PANASONIC type BR2477A

 

 
CONDITIONS OF CERTIFICATION: NO
 
 


- PAGE BREAK -

IECEx Certificate
of Conformity
 
Certificate No.:IECEx LCI 08.0038
 
Date of Issue:2011-03-02Issue No.: 1
 
Page 4 of 4
 
 
DETAILS OF CERTIFICATE CHANGES (for issues 1 and above):
 

Update of nameplate drawing

Use of alternate vendors for capacitors

 

 
 








Copyright © IEC-IECEx 2013 , Geneva Switzerland. All rights reserved.