IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

IECEx Certificate
of Conformity
 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com
 
Certificate No.:
IECEx BAS 09.0155X issue No.:2
 
Status:
Current
 
Date of Issue:2012-01-09 Page 1 of 4


    
Applicant:
GE Oil & Gas - Sondex Wireline Ltd
Range Road
Cody Technology Park
Farnborough
Hampshire
GU14 0FG
United Kingdom


 
Electrical Apparatus:DTR005 Depth Time Recorder IS-ATEX
Optional accessory:


 
Type of Protection:Intrinsic Safety


 
Marking: Ex ia IIC T4 Ga (-20°C ≤ Ta ≤ +40°C) – with protective case
Ex ia IIC T4 Gb (-20°C ≤ Ta ≤ +40°C) – no protective case
 
Approved for issue on behalf of the IECEx
Certification Body:		R S Sinclair

 
Position:Managing Director


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 
 Certificate issued by:
Baseefa
Rockhead Business Park
Staden Lane
Buxton
Derbyshire
SK17 9RZ
United Kingdom


- PAGE BREAK -

IECEx Certificate
of Conformity
 
Certificate No.:IECEx BAS 09.0155X
 
Date of Issue:2012-01-09Issue No.: 2
 
Page 2 of 4
 
 Manufacturer:
GE Oil & Gas - Sondex Wireline Ltd
Range Road
Cody Technology Park
Farnborough
Hampshire
GU14 0FG
United Kingdom


 
 Additional Manufacturing location(s):
 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2004
Edition: 4.0		Electrical apparatus for explosive gas atmospheres - Part 0: General requirements
IEC 60079-11 : 2006
Edition: 5		Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
IEC 60079-26 : 2006
Edition: 2		Explosive atmospheres - Part 26: Equipment with equipment protection level (EPL) Ga
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:
GB/BAS/ExTR09.0238/00GB/BAS/ExTR10.0057/00GB/BAS/ExTR10.0161/00GB/BAS/ExTR11.0109/00


Quality Assessment Report:

GB/BAS/QAR10.0007/00


- PAGE BREAK -

IECEx Certificate
of Conformity
 
Certificate No.:IECEx BAS 09.0155X
 
Date of Issue:2012-01-09Issue No.: 2
 
Page 3 of 4
 
 
Schedule
 
EQUIPMENT:
Equipment and systems covered by this certificate are as follows:
 
The DTR005 Depth Time Recorder IS-ATEX is a ruggedised depth and data recorder for slickline memory logging, although it may be used for other applications. Depth from a shaft encoder is recorded against time together with other analogue channels such as wireline tension. 

The equipment comprises of three PCB’s including a liquid crystal display module. Electrical connections are made to external connectors, switches and light emitting diodes mounted in the wall of the enclosure. Further connections are made to the batteries and associated current limiting resistors. A piezo sounder is mounted in a recess on the inside of the front face of the IP66 metal enclosure. The front of the enclosure has a glass window over the display. When the equipment is fitted inside the protective case it is suitable for EPL Ga when it is removed from the protective case it is only suitable for EPL Gb.

The electrical connections for the Shaft Encoder and analogue inputs are made via a 15m multi-core cable, fitted with a cable gland at the encoder end and a 6 pin socket at the DTR005 end.

 

 
CONDITIONS OF CERTIFICATION: YES as shown below:
 
1.  The equipment must be used in its carry case when located in a Zone 0, requiring an Equipment Protection Level Ga. 

2.  The Apparatus is not capable of withstanding the 500V insulation test required by Clause 6.3.12 of IEC 60079-11: 2006. This must be taken into account when installing the apparatus. 

 

 


- PAGE BREAK -

IECEx Certificate
of Conformity
 
Certificate No.:IECEx BAS 09.0155X
 
Date of Issue:2012-01-09Issue No.: 2
 
Page 4 of 4
 
 
DETAILS OF CERTIFICATE CHANGES (for issues 1 and above):
 

Variation 2.1

To permit an increase in capacitance, minor electrical and minor drawing changes.

 ExTR:  GB/BAS/ExTR11.0109/00File Reference:   10/0803
 
 
 








Copyright © IEC-IECEx 2013 , Geneva Switzerland. All rights reserved.