IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

IECEx Certificate
of Conformity
 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com
 
Certificate No.:
IECEx CSA 07.0001 issue No.:0
 
Status:
Current
 
Date of Issue:2007-02-08 Page 1 of 3


    
Applicant:
Connection Technology Center, Inc
590 Fishers Station Drive
Victor, New York, USA 14564
United States of America


 
Electrical Apparatus:Vibration Sensors, Series AC9xx-xxxxx-x, LP8xx-xx-xxx and LP9xx-xx-xxx (Refer to Schedule)
Optional accessory:


 
Type of Protection:Ex ia


 
Marking: IECEx CSA07.0001
Ex ia IIC
T3 (Tamb = -54ºC to +125ºC) for AC9xx Series
T4 (Tamb = -40ºC to +80ºC) for LP8xx and LP9xx Series
Ui = 28VDC
Ii = 100mA
Ci = 70nF
Li = 51µH
 
Approved for issue on behalf of the IECEx
Certification Body:		Davey Li

 
Position:Technical Manager


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 
 Certificate issued by:
CSA International
178 Rexdale Boulevard
Toronto, Ontario M9W IR3
Canada
and
1707 - 94th Street
Edmonton, AB T6N 1E6
Canada


- PAGE BREAK -

IECEx Certificate
of Conformity
 
Certificate No.:IECEx CSA 07.0001
 
Date of Issue:2007-02-08Issue No.: 0
 
Page 2 of 3
 
 Manufacturer:
Connection Technology Center, Inc
590 Fishers Station Drive
Victor, New York, USA 14564
United States of America


 
 Additional Manufacturing location(s):
 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2000
Edition: 3.1		Electrical apparatus for explosive gas atmospheres - Part 0: General requirements
IEC 60079-11 : 1999
Edition: 4		Electrical apparatus for explosive gas atmospheres - Part 11: Intrinsic safety 'i'
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:
CA/CSA/ExTR07.0004/00


Quality Assessment Report:

CA/CSA/QAR06.0012/00


- PAGE BREAK -

IECEx Certificate
of Conformity
 
Certificate No.:IECEx CSA 07.0001
 
Date of Issue:2007-02-08Issue No.: 0
 
Page 3 of 3
 
 
Schedule
 
EQUIPMENT:
Equipment and systems covered by this certificate are as follows:
 
Ex ia IIC T3 (AC9xx Series); T4 (LP8xx & LP9xx Series)
Ambient Temperature Range:  -54ºC to +125ºC (AC9xx Series) -40ºC to +80ºC (LP8xx & LP9xx Series)

AC Series Model Breakdown

Part Number
Description
Remarks
AC901-1A
10mV/g, IS, top exit, 2 pin connector

 

AC901-2A/XXX-Y
10mV/g, IS, top exit, integral cable
Max length 200ft
AC901-3A/XXX-Y
10mV/g, IS, top exit, armor jacket integral cable
Max length 200ft

 

 

 

AC902-1A
10mV/g, IS, side exit, 2 pin connector

 

AC902-2A/XXX-Y
10mV/g, IS, side exit, integral cable
Max length 200ft
AC902-3A/XXX-Y
10mV/g, IS, side exit, armor jacket integral cable
Max length 200ft

 

 

 

AC903-1A
50mV/g, IS, top exit, 2 pin connector

 

AC903-2A/XXX-Y
50mV/g, IS, top exit, integral cable
Max length 200ft
AC903-3A/XXX-Y
50mV/g, IS, top exit, armor jacket integral cable
Max length 200ft

 

 

 

AC904-1A
50mV/g, IS, side exit, 2 pin connector

 

AC904-2A/XXX-Y
50mV/g, IS, side exit, integral cable
Max length 200ft
AC904-3A/XXX-Y
50mV/g, IS, side exit, armor jacket integral cable
Max length 200ft

 

 

 

AC905-1A
100mV/g, IS, top exit, 2 pin connector

 

AC905-2A/XXX-Y
100mV/g, IS, top exit, integral cable
Max length 200ft
AC905-3A/XXX-Y
100mV/g, IS, top exit, armor jacket integral cable
Max length 200ft

 

 

 

AC906-1A
100mV/g, IS, side exit, 2 pin connector

 

AC906-2A/XXX-Y
100mV/g, IS, side exit, integral cable
Max length 200ft

AC906-3A/XXX-Y

100mV/g, IS, side exit, armor jacket integral cable
Max length 200ft

LP Series Model Breakdown

Part Number

Description
Remarks
LP802-1A-XYZ
Velocity Output, IS, top exit, 2 pin connector

 

LP802-2A-XYZ/LLL-C
Velocity Output, IS, top exit, integral cable
Max length 200ft
LP802-3A-XYZ/LLL-C
Velocity Output, IS, top exit, integral cable, armored jacket
Max length 200ft

 

 

 

LP804-1A-XYZ
Velocity Output, IS, side exit, 2 pin connector

 

LP804-2A-XYZ/LLL-C
Velocity Output, IS, side exit, integral cable
Max length 200ft
LP804-3A-XYZ/LLL-C
Velocity Output, IS, side exit, integral cable, armored jacket
Max length 200ft

 

 

 

LP902-1A-XYZ
Acceleration Output, IS, top exit, 2 pin connector

 

LP902-2A-XYZ/LLL-C
Acceleration Output, IS, top exit, integral cable
Max length 200ft
LP902-3A-XYZ/LLL-C
Acceleration Output, IS, top exit, integral cable, armored jacket
Max length 200ft

 

 

 

LP904-1A-XYZ
Acceleration Output, IS, side exit, 2 pin connector

 

LP904-2A-XYZ/LLL-C
Acceleration Output, IS, side exit, integral cable
Max length 200ft
LP904-3A-XYZ/LLL-C
Acceleration Output, IS, side exit, integral cable, armored jacket
Max length 200ft

 

Legend
X – Measurement Range
0 – 9
User defined
Y – Range Type
R or P
RMS or Peak
Z – Frequency Range
1 – 99
User defined
LLL
Cable Length
Maximum length 2000ft
C
Connector Type

 
 
CONDITIONS OF CERTIFICATION: NO
 
 







Copyright © IEC-IECEx 2013 , Geneva Switzerland. All rights reserved.