IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

leftca_pagelinks
IECEx Certificate
of Conformity

 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com

 
Certificate No.:
IECEx BKI 06.0005X issue No.: 0
 
Status:
Current
 
Date of Issue:2006-06-28Page 1 of 3
 
 
Applicant:
Cooper Crouse-Hinds GmbH
previously CEAG Sicherheitstechnik GmbH
Neuer Weg Nord 49
D-69412 Eberbach, Germany
Germany
Equipment:Plug-in connector ( eXLink )
 
Optional accessory:Type GHG 57. ….R….
 
Type of Protection:General requirements, Flameproof enclosure, Increased safety, Dust explosion protection

 Marking: Ex de IIC T6
-25 °C ≤ Tamb ≤ +40 °C ( plastic version )
-55 °C ≤ Tamb ≤ +40 °C ( plastic version, schockproof )
-55 °C ≤ Tamb ≤ +40 °C ( metal version )
-55 °C ≤ Tamb ≤ +75 °C ( metal version, Ith max. 2A, schockproof )
-55 °C ≤ Tamb ≤ +75 °C ( plastic version, Ith max. 2A, schockproof )
Ex tD A21 IP66 T52°C
-55 °C ≤ Tamb ≤ +40 °C
 
 
Approved for issue on behalf of the IECEx
Certification Body:
János Hankó

 
Position:Director


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 

  Certificate issued by:
Testing Station for Explosion Proof Equipment
H 1037 BUDAPEST
MIKOVINY S.u. 2-4
Hungary


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx BKI 06.0005X
 
Date of Issue:2006-06-28Issue No.: 0
 
Page 2 of 3
  
Manufacturer:
Cooper Crouse-Hinds GmbH
previously CEAG Sicherheitstechnik GmbH
Neuer Weg Nord 49
D-69412 Eberbach, Germany
Germany


 
Additional Manufacturing location(s):

 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2004
Edition: 4.0
Electrical apparatus for explosive gas atmospheres - Part 0: General requirements
IEC 60079-1 : 2003
Edition: 5
Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
IEC 60079-7 : 2001
Edition: 3
Electrical apparatus for explosive gas atmospheres - Part 7: Increased safety 'e'
IEC 61241-0 : 2004
Edition: 1
Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements
IEC 61241-1 : 2004
Edition: 1
Electrical apparatus for use in the presence of combustible dust - Part 1: Protection by enclosures "tD"
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:

HU/BKI/ExTR06.0009/00


Quality Assessment Report:

HU/BKI/QAR06.0005/00


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx BKI 06.0005X
 
Date of Issue:2006-06-28Issue No.: 0
 
Page 3 of 3
 
Schedule
 EQUIPMENT:
Equipment and systems covered by this certificate are as follows
 
 
See details in Addendum to IECEx BKI 06.0005 X


 SPECIFIC CONDITIONS OF USE:   YES as shown below:
 
 
See details in Addendum to IECEx BKI 06.0005 X
 




Copyright © IEC-IECEx 2019 , Geneva Switzerland. All rights reserved.