IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

leftca_pagelinks
IECEx Certificate
of Conformity

 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com

 
Certificate No.:
IECEx CML 16.0126X issue No.: 0

Certificate history:

 
Status:
Current
 
Date of Issue:2016-11-22Page 1 of 3
 
 
Applicant:
Pepperl + Fuchs GmbH
Lilienthalstrasse 200
68307 Mannheim
Germany
Equipment:Universal Temperature Module type KFD2-UT2-Ex*-*
 
Optional accessory:
 
Type of Protection:Type n

 Marking:

Ex nA IIC T4 Gc

Ta = -20°C to +60°C

 
 
Approved for issue on behalf of the IECEx
Certification Body:
D R Stubbings MIET

 
Position:Technical Director


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 

  Certificate issued by:
Certification Management Limited
Unit 1, Newport Business Park
New Port Road
Ellesmere Port, CH65 4LZ
United Kingdom


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx CML 16.0126X
 
Date of Issue:2016-11-22Issue No.: 0
 
Page 2 of 3
  
Manufacturer:
Pepperl + Fuchs GmbH
Lilienthalstrasse 200
68307 Mannheim
Germany


 
Additional Manufacturing location(s):
Pepperl + Fuchs Asia PTE Ltd
18 Ayer Rajah Crescent
Singapore 139942
Singapore

 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2011
Edition: 6.0
Explosive atmospheres - Part 0: General requirements
IEC 60079-15 : 2010
Edition: 4
Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:

GB/CML/ExTR16.0157/00


Quality Assessment Report:

DE/PTB/QAR06.0008/07


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx CML 16.0126X
 
Date of Issue:2016-11-22Issue No.: 0
 
Page 3 of 3
 
Schedule
 EQUIPMENT:
Equipment and systems covered by this certificate are as follows
 
 

The Universal Temperature Modules are isolation barriers. 

See Annex for full description and Conditions of Manufacture



 SPECIFIC CONDITIONS OF USE:   YES as shown below:
 
 

See Annex for Conditions of Certification

 




Copyright © IEC-IECEx 2019 , Geneva Switzerland. All rights reserved.