|Equipment and systems covered by this certificate are as follows:|
Controllers: Ultima XL, Ultima XE Main
Sensors: Ultima XE Sensor, Ultima XI Sensor, Ultima XIR Sensor
Accessories: Ultima Calibrator, Ultima Controller, Ultima XE Sensor Weather/Wind/Sensor Guard P/N 10028904, Ultima XI and Ultima XIR Environmental Guard P/N 10041265, Ultima X Power Supply, HART Module
|SPECIFIC CONDITIONS OF USE: YES as shown below:|
1) Upon installation of the Ultima XL Control Unit, the label shall be permanently marked to show the type of explosion protection used for the installation.
2) The Ultima X Control Unit complies with IEC 61779-1 and IEC 61779-4 when connected to a Detector Head that also has been evaluated to IEC 61779-1 and IEC 61779-4.
3) The Ultima XE Sensor, Ultima XI Sensor, and Ultima XIR Sensor complies with IEC 61779-1 and IEC 61779-4 when connected to a Control Unit that also has been evaluated to IEC 61779-1 and IEC 61779-4.
4) The Ultima XI Sensor shall be connected directly to a junction box or instrument suitable for the area of installation to provide protection for the flying leads.
5) The Ultima XE Sensor and the Ultima XIR Sensor shall be connected directly to an Ultima X Series Control Unit or remote junction box.