IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

IECEx Certificate
of Conformity

IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit

Certificate No.:
IECEx FMG 13.0005X issue No.: 0
Date of Issue:2013-06-14Page 1 of 4
Great Plains Industries, Inc
5252 E. 36th Street North.
Wichita, Kansas 67220
United States of America
Equipment:Electronic Digital Meter
Optional accessory:Remote (Display) Kit Assembly 113275-1
Type of Protection:Intrinsically Safe ia

 Marking: Ex ia IIC T6 Ta = 60°C Ga IP65
Approved for issue on behalf of the IECEx
Certification Body:

Position:Group Manager, Electrical

(for printed version)
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.

  Certificate issued by:
FM Approvals LLC
1151 Boston-Providence Turnpike
Norwood, MA 02062
United States of America


IECEx Certificate
of Conformity

Certificate No.:IECEx FMG 13.0005X
Date of Issue:2013-06-14Issue No.: 0
Page 2 of 4
Great Plains Industries, Inc.
5252 E. 36th Street North.
Wichita, Kansas 67220 USA
United States of America

Additional Manufacturing location(s):


This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.

The apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

IEC 60079-0 : 2011
Edition: 6.0
Explosive atmospheres - Part 0: General requirements
IEC 60079-11 : 2011
Edition: 6.0
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.

TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

Test Report:


Quality Assessment Report:



IECEx Certificate
of Conformity

Certificate No.:IECEx FMG 13.0005X
Date of Issue:2013-06-14Issue No.: 0
Page 3 of 4
Equipment and systems covered by this certificate are as follows

 Electronic Digital Meter

 The Electronic Digital Meters are battery powered (two 3 volt Lithium batteries) turbine flow meters. These meters contain a turbine assembly, microprocessor and LCD readout and are designed for measuring batch or cumulative quantities of liquids including fuels. Each turbine assembly is contained in a housing made of brass, aluminum, stainless steel, nylon or PVDF plastic. Process pressure rating varies depending on the enclosure material and construction. The display cover assembly is clear plastic and all of the electronics except the batteries and the LCD display are completely encapsulated. A remote kit option is also available that permits the electronics assembly to be mounted up to 100 feet from the turbine assembly.

See attachement for model code information.


The Electronic Digital Meters shall only be used with GPI battery 902004-02.

Some of the enclosure contains aluminium and are considered to present a potential risk of ignition by impact or friction. Care must be taken into account during installation and use to prevent impact or friction

Part of the enclosure is constructed from plastic. To prevent the risk of electrostatic sparking the plastic surface should only be cleaned only with a damp cloth.



IECEx Certificate
of Conformity

Certificate No.:IECEx FMG 13.0005X
Date of Issue:2013-06-14Issue No.: 0
Page 4 of 4
 Additional information:
See attached

Copyright © IEC-IECEx 2019 , Geneva Switzerland. All rights reserved.