IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
IECEx Guest User | ExCB Login

IECEx Certificate
of Conformity

 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com

 
Certificate No.:
IECEx KEM 08.0017 issue No.:1
 
Status:
Current
 
Date of Issue:2009-06-12 Page 1 of 4


    
Applicant:
Asco Controls B.V.
Industrielaan 21
3925 BD Scherpenzeel
The Netherlands


 
Electrical Apparatus:Solenoid Valve Operator type IS-MXX-EE and type IS-M12I
Optional accessory:


 
Type of Protection:Ex ia, Ex iaD


 
Marking: Ga Ex ia IIC T6
Ex iaD 21 IP6X T85 ºC
 
Approved for issue on behalf of the IECEx
Certification Body:
C.G. van Es

 
Position:Certification manager


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 

 Certificate issued by:
KEMA Quality B.V.
Utrechtseweg 310
6812 AR Arnhem
The Netherlands


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx KEM 08.0017
 
Date of Issue:2009-06-12Issue No.: 1
 
Page 2 of 4
 
 Manufacturer:
Asco Controls B.V.
Industrielaan 21
3925 BD Scherpenzeel
The Netherlands


 
 Manufacturing location(s):
ASCO JOUCOMATIC
53, rue de Beauce
BP17
28111 LUCE CEDEX 2
France
ASCO CONTROLS B.V.
Industrielaan 21
3925 BD Scherpenzeel
The Netherlands
ASCO JOUCOMATIC Ltd.
2 Pit Hey Place
West Pimbo
SKELMERSDALE
Lancashire WN8 9PG
United Kingdom
 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2004
Edition: 4.0
Electrical apparatus for explosive gas atmospheres - Part 0: General requirements
IEC 60079-11 : 2006
Edition: 5
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
IEC 60079-26 : 2006
Edition: 2
Explosive atmospheres - Part 26: Equipment with equipment protection level (EPL) Ga
IEC 61241-0 : 2004
Edition: 1
Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements
IEC 61241-11 : 2005
Edition: 1
Electrical apparatus for use in the pressence of combustible dusts - Part 11: Protection by intrinsic safety 'iD'
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:
NL/KEM/ExTR07.0062/00


Quality Assessment Report:

FR/LCI/QAR07.0006/00GB/SIR/QAR06.0056/01NL/KEM/QAR07.0018/02


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx KEM 08.0017
 
Date of Issue:2009-06-12Issue No.: 1
 
Page 3 of 4
 
 
Schedule
 
EQUIPMENT:
Equipment and systems covered by this certificate are as follows:
 

Solenoid Valve Operator Type IS-MXX-EE and Type IS-M12-I with mounted valve are used for pushing or pulling valve action. Valve Operator Type IS-MXX-EE contains an electronic circuit for enhanced valve operation.

Ambient temperature range -40 °C to +60 °C.

The apparatus enclosure provides a degree of protection of at least IP65 respectively IP67 in accordance with
IEC 60529.

The indicated maximum surface temperature "T" of the enclosure is referred to a maximum ambient temperature
of 60 °C.

Input circuit (terminals or connector):
in type of protection intrinsic safety Ex ia IIC, only for connection to a certified intrinsically safe circuit, with following maximum values:
U
i = 32 V; Ii = 500 mA; Pi = 1,5 W; Ci = 0 nF; Li = 0 mH.

 
CONDITIONS OF CERTIFICATION: NO
 
 


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx KEM 08.0017
 
Date of Issue:2009-06-12Issue No.: 1
 
Page 4 of 4
 
 
DETAILS OF CERTIFICATE CHANGES (for issues 1 and above):
 
Issue 1:
Added Quality Assessment Reports NL/KEM/QAR07.0018/02 and FR/LCI/QAR07.0006/00;
changed QAR reference number GB/SIR/QAR06.0056/00 to GB/SIR/QAR06.0056/01
Reason: correction
 
 








Copyright © IEC-IECEx 2012 , Geneva Switzerland. All rights reserved.