IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

IECEx Certificate
of Conformity

 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com

 
Certificate No.:
IECEx PTB 07.0058 issue No.:1
 
Status:
Current
 
Date of Issue:2008-07-18 Page 1 of 4


    
Applicant:
aqua signal Aktiengesellschaft
Von-Thünen-Straße 12, 28307 Bremen, Germany
Germany


 
Electrical Apparatus:Luminary with fluorescent lamp
Optional accessory:


 
Type of Protection:Flameproof Enclosure


 
Marking: Ex d IIC T5 or T6; Ex tD A21 IP67 T95 °C or T80 °C
 
Approved for issue on behalf of the IECEx
Certification Body:
Dr.-Ing Uwe Klausmeyer

 
Position:Head of Department "Flame Transmission Processes"


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 

 Certificate issued by:
Physikalisch-Technische Bundesanstalt (PTB)
Bundesallee 100
38116 Braunschweig
Germany


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx PTB 07.0058
 
Date of Issue:2008-07-18Issue No.: 1
 
Page 2 of 4
 
 Manufacturer:
aqua signal Aktiengesellschaft
Von-Thünen-Straße 12, 28307 Bremen, Germany
Germany


 
 Additional Manufacturing location(s):
aqua signal Aktiengesellschaft
Von-Thünen-Straße 12, 28307 Bremen, Germany
Germany
aqua signal Aktiengesellschaft
Glasower Weg 5, 17166 Teterow, Germany
Germany
 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2004
Edition: 4.0
Electrical apparatus for explosive gas atmospheres - Part 0: General requirements
IEC 60079-1 : 2001
Edition: 4
Electrical apparatus for explosive gas atmospheres - Part 1: Flameproof enclosures 'd'
IEC 61241-0 : 2004
Edition: 1
Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements
IEC 61241-1 : 2004
Edition: 1
Electrical apparatus for use in the presence of combustible dust - Part 1: Protection by enclosures "tD"
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:
DE/PTB/ExTR07.0058/00


Quality Assessment Report:

DE/PTB/QAR06.0017/00


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx PTB 07.0058
 
Date of Issue:2008-07-18Issue No.: 1
 
Page 3 of 4
 
 
Schedule
 
EQUIPMENT:
Equipment and systems covered by this certificate are as follows:
 

The housing of the luminary with fluorescent lamps is a polycarbonate tube which has aluminium housing elements attached to its ends by means of sealing compound. The flame­proof enclosure is delimited by two housing covers.

Power supply is by means of flameproof cable entries, for which a separate certificate has been issued.  

The identification for the temperature class varies subject to the luminuous element used from case to case. 

The type range depends on the used voltage, frequency, lamp and ballast.

 

 
CONDITIONS OF CERTIFICATION: NO
 
 


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx PTB 07.0058
 
Date of Issue:2008-07-18Issue No.: 1
 
Page 4 of 4
 
 
DETAILS OF CERTIFICATE CHANGES (for issues 1 and above):
 
change of marking
 
 








Copyright © IEC-IECEx 2013 , Geneva Switzerland. All rights reserved.