Ex ia IIC T6...T1 GaorEx ia IIC T6...T1 GborEx ia I MborEx ia IIIC T135°C DaorEx ib IIIC T135°C Db
This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.
This Unit verification certificate is issued as verification that the Apparatus identified on page 1, was assessed and tested and found to comply with the IEC Standard list below. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.
The apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:
As this is a Unit Verification Certificate, no QAR is applicable as this certificate is specific to the items listed by serial number or other unique identification.
The cuboidal inductive proximity sensors of types FJ... NJ..., NB... and NC are used to convert mechanical displacements into an electrical signal.
The sensors are supplied from an intrinsically safe circuit and they are suitable to be used in hazardous areas of group I, group II and group III.The area classification of the inductive sensor depends on the level of protection of the intrinsically safe circuits the sensors are connected to.
For further information reference is made to the annex.
For special conditions, reference is made to the annex.
- Extension to dust hazardous area - Update of the state of standards (IEC 60079-0:2011, 6th Edition; IEC 60079-11:2011, 6th Edition) - Issue 1 combines the complete certification data of the products; therefore the documentation to Issue 0 is no longer applied - the harmonized standard IEC 60079-26:2014, 3rd Edition is no longer listed in this COC, because the product’s relevant requirements of the standard are moved to IEC 60079-0 - simplification of type names of the products: deletion of blanks, consistent placeholders: “…” - Combination of existing temperature tables for group II to one central Ga/Gb- temperature table - following types of Cuboidal inductive proximity sensors are added: NBN40-U...LK-N0...
For electrical and thermal specifications for the individual types of cuboidal inductive proximity sensors, reference is made to the annex.