IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

leftca_pagelinks
IECEx Certificate
of Conformity

 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com

 
Certificate No.:
IECEx PTB 11.0037X issue No.: 3
 
Status:
Current
 
Date of Issue:2018-01-19Page 1 of 5
 
 
Applicant:
Pepperl+Fuchs GmbH
Lilienthalstrasse 200
68307 Mannheim
Germany
Equipment:Cylindrical inductive proximity sensors
 
Optional accessory:
 
Type of Protection:Intrinsic Safety

 Marking:

Ex ia IIC T6...T1 Ga
or
Ex ia IIC T6...T1 Gb
or
Ex ia I Mb
or
Ex ia IIIC T135°C Da
or
Ex ib IIIC T135°C Db

 

 
 
Approved for issue on behalf of the IECEx
Certification Body:
Dr.-Ing. F. Lienesch

 
Position:Head of Department "Explosion Protection in Sensor Technology and Instrumentation"


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 

  Certificate issued by:
Physikalisch-Technische Bundesanstalt (PTB)
Bundesallee 100
38116 Braunschweig
Germany


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx PTB 11.0037X
 
Date of Issue:2018-01-19Issue No.: 3
 
Page 2 of 5
  
Manufacturer:
Pepperl+Fuchs GmbH
Lilienthalstrasse 200
68307 Mannheim
Germany


 
Additional Manufacturing location(s):
Pepperl+Fuchs Asia Pte. Ltd.
P+F Building
18 Ayer Rajah Crescent
Singapore 139942
Singapore
PT. Pepperl+Fuchs Bintan
JI. Asoka SD 56
Bintan Industrial Estate
Lobam, Bintan Island
Indonesia
Pepperl+Fuchs Co. Ltd.
Lot S 12-16a, Street 20
Tan Thuan EPZ
Ward tan Thuan Dong,
District 7
Ho Chi Minh City
Vietnam
Pepperl+Fuchs Manufacturing s.r.o.
Tovarni 10
54102 Trutnov
Czech Republic
Pepperl+Fuchs GmbH
Lilienthalstrasse 200
68307 Mannheim
Germany

 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2011
Edition: 6.0
Explosive atmospheres - Part 0: General requirements
IEC 60079-11 : 2011
Edition: 6.0
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:

DE/PTB/ExTR11.0053/00DE/PTB/ExTR13.0012/00DE/PTB/ExTR13.0012/01DE/PTB/ExTR13.0012/02


Quality Assessment Report:

DE/PTB/QAR06.0008/08


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx PTB 11.0037X
 
Date of Issue:2018-01-19Issue No.: 3
 
Page 3 of 5
 
Schedule
 EQUIPMENT:
Equipment and systems covered by this certificate are as follows
 
 

The cylindrical inductive proximity sensors of types NC… and NJ… are used to convert mechanical displacements into an electrical signal.

The sensors are supplied from an intrinsically safe circuit and they are suitable to be used in hazardous areas of group I, group II and group III.

The area classification of the inductive sensor depends on the level of protection of the intrinsically safe circuit the sensor is connected to.

For further information, reference is made to the annex



 SPECIFIC CONDITIONS OF USE:   YES as shown below:
 
 

For special conditions, reference is made to the annex.

 


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx PTB 11.0037X
 
Date of Issue:2018-01-19Issue No.: 3
 
Page 4 of 5
 
 DETAILS OF CERTIFICATE CHANGES (for issues 1 and above):
 
 

The changes concern exclusively the inclusion of additional manufacturing locations which have been forgotten in the previous issue.
All these additional manufacturing locations were already documented in DE/PTB/ExTR13.0012/01 and released by DE/PTB/QAR06.0008/08.

 
 


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx PTB 11.0037X
 
Date of Issue:2018-01-19Issue No.: 3
 
Page 5 of 5
 
 Additional information:
 
 

For electrical and thermal specifications for the individual types of cylindrical inductive proximity sensors, reference is made to the annex

 
 
 




Copyright © IEC-IECEx 2019 , Geneva Switzerland. All rights reserved.